Lexmark CX730 User Manual page 140

Use printer menus
Menu item
Tray Renumber
Restore Defaults
Print Timeout
Off
On* (90 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
Image
Menu item
Auto Fit
On
Off*
Invert
Off*
On
Scaling
Anchor Top Left
Best Fit*
Anchor Center
Fit Height/Width
Fit Height
Fit Width
Orientation
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Restore the tray renumber values to their factory defaults.
Set the printer to end a print job after it has been idle for the specified
amount of time.
Description
Select the best available paper size and orientation setting for an image.
Note: When set to On, this menu item overrides the scaling and orientation
settings for the image.
Invert bitonal monochrome images.
Note: This menu item does not apply to GIF or JPEG image formats.
Adjust the image to fit the printable area.
Note: When Auto Fit is set to On, Scaling is automatically set to Best Fit.
Specify the orientation of text and graphics on the page.
140