Lexmark CX730 User Manual page 187

Use printer menus
Menu item
802.1x Authentication
Device Login Name
Device Login Password
Validate Serve Certificate (On*)
Enable Event Logging (Off*)
802.1x Device Certificate
Allowable Authentication Mechanisms
EAP ‑ MD5 (On*)
EAP - MSCHAPv2 (On*)
LEAP (On*)
PEAP (On*)
EAP - TLS (On*)
EAP - TTLS (On*)
TTLS Authentication Method
(MSCHAPv2*)
Note: An asterisk (*) next to a value indicates the factory default setting.
LPD Configuration
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
LPD Timeout
0–65535 seconds (90*)
LPD Banner Page
Off*
On
LPD Trailer Page
Off*
On
LPD Carriage Return Conversion
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the settings for authenticating the 802.1x connection.
Configure the allowed authentication mechanisms for the 802.1x
connection.
Description
Set the time‑out value to stop the Line Printer Daemon (LPD) server
from waiting indefinitely for hung or invalid print jobs.
Print a banner page for all LPD print jobs.
Note: A banner page is the first page of a print job used as a
separator of print jobs and to identify the originator of the print job
request.
Print a trailer page for all LPD print jobs.
Note: A trailer page is the last page of a print job.
Enable carriage return conversion.
Note: Carriage return is a mechanism that commands the printer to
move the position of the cursor to the first position on the same
line.
187