Lexmark CX730 User Manual page 171

Use printer menus
Menu item
Scan Edge to Edge
Off*
On
Sharpness
1–5 (3*)
Temperature
‑4 to 4 (0*)
Blank Pages
Blank Page Removal (Do Not Remove*)
Blank Page Sensitivity (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Text Default
5–95 (75*)
Text/Photo Default
5–95 (75*)
Photo Default
5–95 (50*)
Use Multi‑Page TIFF
On*
Off
TIFF Compression
LZW*
JPEG
Transmission Log
Print Log*
Do Not Print Log
Print Only For Error
Log Paper Source
Tray [x] (1*)
Multipurpose Feeder
Custom Job Scanning
Off*
On
Scan Preview
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Allow edge‑to‑edge scanning of the original document.
Adjust the sharpness in the scanned image.
Generate a bluer or redder output of the original document.
Set the sensitivity of scans in relation to blank pages in the original
document.
Description
Set the quality of text on the scanned image.
Set the quality of text and photo on the scanned image.
Set the quality of photo on the scanned image.
Enable scanning of multiple TIFF images in one TIFF file.
Specify the compression type for TIFF files.
Print a transmission log for FTP scans.
Specify the paper source for printing FTP logs.
Set the printer to scan the first set of original documents using the specified
settings, and then scan the next set with the same or different settings.
Note: This menu item appears only when a hard disk or an ISD is installed.
Show a preview of the original document.
Note: This menu item appears only when a hard disk or an ISD is installed.
171