Lexmark CX730 User Manual page 151

Use printer menus
Admin Controls
Menu item
Automatic Redial
0–9 (5*)
Redial Frequency
1–200 minutes (3*)
Enable ECM
On*
Off
Enable Fax Scans
On*
Off
Driver to Fax
On*
Off
Allow Save as Shortcut
On*
Off
Max Speed
33600*
14400
9600
4800
2400
Custom Job Scanning
Off*
On
Scan Preview
Off*
On
Adjust ADF Skew
Off
On*
Enable Color Fax Scans
Off by Default*
On by Default
Never Use
Always Use
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the number of attempts that the printer redials before it cancels sending
the fax to a specified destination.
Increase the time between redial attempts to increase the chance of sending
fax successfully.
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax transmission process caused
by telephone line noise and poor signal strength.
Create faxes using the printer scanner.
Allow the print driver to send fax.
Save fax numbers as shortcuts on the printer.
Set the maximum speed for sending fax.
Turn on scanning of custom jobs by default.
Note: This menu item appears only when a hard disk or an intelligent storage
drive (ISD) is installed.
Show a preview of the scan on the display.
Note: This menu item appears only when a hard disk or an ISD is installed.
Correct slight skew in the scanned image.
Enable color scans for fax.
151