Head Restraints - Jeep GRAND CHEROKEE WK 2022 Owner's Manual

34 GETTING TO KNOW YOUR VEHICLE
You can choose from HI, LO, or OFF heat settings.
The indicator arrows in the touchscreen buttons
indicate the level of heat in use. Two indicator
arrows will illuminate for HI, and one for LO.
Turning the heating elements off will return the
user to the radio screen.
Press the heated seat button once to turn the HI

setting on.
Press the heated seat button a second time to

turn the LO setting on.
Press the heated seat button a third time to turn

the heating elements off.
NOTE:
Once a heat setting is selected, heat will be felt

within two to five minutes.
The engine must be running for the heated

seats to operate.
The level of heat selected will stay on until the

operator changes it.
For information on use with the Remote Start
system, see Ú page 20.
H R
EAD ESTRAINTS
Head restraints are designed to reduce the risk of
injury by restricting head movement in the event of
a rear impact. Head restraints should be adjusted
so that the top of the head restraint is located
above the top of your ear.
WARNING!
All occupants, including the driver, should not

operate a vehicle or sit in a vehicle's seat until
the head restraints are placed in their proper
positions in order to minimize the risk of neck
injury in the event of a crash.
Head restraints should never be adjusted

while the vehicle is in motion. Driving a vehicle
with the head restraints improperly adjusted
or removed could cause serious injury or
death in the event of a collision.
Supplemental Active Head Restraints —
Front Seats
Active Head Restraints (AHR) are passive,
deployable components, and vehicles with this
equipment cannot be readily identified by any
markings, only through visual inspection of the
head restraint. The AHRs will be split in two halves,
with the front half being soft foam and trim, the
back half being decorative plastic.
When AHRs deploy during a rear impact, the front
half of the head restraint extends forward to
reduce the gap between the back of the
occupant's head and the AHR. This system is
design to reduce the risk of injury to the driver or
front passenger in certain types of rear impacts.
For more information, see Ú page 200.
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint, push
the adjustment button, located at the base of the
head restraint, and push downward on the head
restraint.
Adjustment Button
For comfort, the Active Head Restraints can be
tilted forward and rearward. To tilt the head
restraint closer to the back of your head, pull
forward on the bottom of the head restraint. Push
rearward on the bottom of the head restraint to
move the head restraint away from your head.