Table of Contents
Advertisement
1. Remove the spare tire, jack, and tools from
storage. Turn the fastener counterclockwise
to remove the spare tire.
Removing Spare Tire Fastener
2. Loosen (but do not remove) the wheel lug nuts,
using the lug wrench by turning them counter-
clockwise, one turn, while the wheel is still on
the ground.
Loosen Lug Nuts
3. Assemble the jack and jacking tools.
Jack And Tool Assembly
Placement for the front and rear jacking loca-
tions are critical. See the following images for
proper jacking locations.
IN CASE OF EMERGENCY
Jacking Locations
4. For the front axle, place the jack on the body
flange just behind the front tire as indicated by
the triangular lift point symbol on the sill
molding. Do not raise the vehicle until you are
sure the jack is fully engaged.
Front Lifting Point
237
7
Advertisement
Table of Contents
