Restore Configuration - ZyXEL Communications WAP3205 User Manual

10.4.2 Re sto re C o nfig ura tio n
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WAP3205 v3.
Table 36 Maintenance Restore Configuration
L ABEL
Choose File
Upload
Note: Do not turn off the WAP3205 v3 while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute before
logging into the WAP3205 v3 again.
Configuration Restore Successful
Fig ure 55
The WAP3205 v3 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Temporarily Disconnected
Fig ure 56
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default WAP3205 v3 IP address (192.168.1.2). See
page 14 for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click
C o nfig ura tio n
Configuration Restore Error
Fig ure 57
Chapter 10 Tools
DESC RIPT IO N
Click button to find the backup file of previous configuration you saved on your
C ho o se File
computer using the
Ba c kup
Click to begin the upload process.
Uplo a d
screen.
WAP3205 v3 User's Guide
button.
78
Section 2.2 on
to go back to the
Re turn