Wps Station Screen - ZyXEL Communications WAP3205 User Manual

Table 26 Network > Wireless LAN > WPS (continued)
L ABEL
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Refresh
6.8 WPS Sta tio n Sc re e n
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Wire le ss L AN
Note: Note: After you click
wireless station utility within 2 minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station again after the first 2
minutes.
Network > Wireless LAN > WPS Station
Fig ure 41
Chapter 6 Wireless LAN
DESC RIPT IO N
This displays
C o nfig ure d
or when
Ena b le WPS
The current wireless and wireless security settings also appear in the screen.
This displays
Unc o nfig ure d
changes on the WAP3205 v3 or you click
wireless and wireless security settings.
This button is only available when the WPS status displays
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the WAP3205 v3.
This shows the wireless LAN's standard.
This shows the descriptive name used to identify the WAP3205 v3 in the wireless LAN.
This shows the level of wireless security the WAP3205 v3 is using.
Click to save your changes back to the WAP3205 v3.
Apply
Click to get this screen information afresh.
Re fre sh
> tab.
WPS Sta tio n
Push Butto n
WAP3205 v3 User's Guide
when the WAP3205 v3 has connected to a wireless network using WPS
is selected and wireless or wireless security settings have been changed.
if WPS is disabled and there are no wireless or wireless security
Re le a se _C o nfig ura tio n
on this screen, you have to press a similar button in the
64
to remove the configured
.
C o nfig ure d
Ne two rk
>