This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
WAP3205 v3 Access and Login
•
Internet Access
•
Resetting the WAP3205 v3 to Its Factory Defaults
•
Wireless Problems
13.1 Po we r, Ha rdwa re C o nne c tio ns, a nd L EDs
The WAP3205 v3 does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the WAP3205 v3.
1
Make sure the power adaptor or cord is connected to the WAP3205 v3 and plugged in to an
2
appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the WAP3205 v3.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Disconnect and re-connect the power adaptor to the WAP3205 v3.
4
If the problem continues, contact the vendor.
5
C
T ro ub le sho o ting
WAP3205 v3 User's Guide
83
HA PTER
Section 1.3 on page
11.
1 3