Internet Access - ZyXEL Communications WAP3205 User Manual

• If your computer is connected wirelessly, use a computer that is connected to a
I can see the
L o g in
Make sure you have entered the password correctly. The default username is
1
password is
This can happen when you fail to log out properly from your last session. Try logging in again after 5
2
minutes.
Disconnect and re-connect the power adaptor or cord to the WAP3205 v3.
3
If this does not work, you have to reset the device to its factory defaults. See
4
13.3 Inte rne t Ac c e ss
I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide.
If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are
2
the same as the settings in the AP.
Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again.
3
Go to
4
Ma inte na nc e > O pe ra tio n Mo de > G e ne ra l
Check your computer's IP is set to automatic, if your computer has Static IP change it back to
5
automatic to access the Internet. For more information on how to change your computer's IP address
see Section 2.2 on page
If the problem continues, contact your ISP.
6
I cannot access the Internet anymore. I had access to the Internet (with the WAP3205 v3), but my
Internet connection is not available anymore.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide and
Reboot the WAP3205 v3.
2
If the problem continues, contact your ISP.
3
Chapter 13 Troubleshooting
screen, but I cannot log in to the WAP3205 v3.
. This field is case-sensitive, so make sure [Caps Lock] is not on.
1234
14.
Section 1.3 on page
WAP3205 v3 User's Guide
. Check your
11.
85
L AN
and default
a dm in
Section 13.4 on page
Syste m O pe ra tio n Mo de
/ port.
ET HERNET
86.
setting.