Scheduling Screen - ZyXEL Communications WAP3205 User Manual

The following table describes the labels in this screen.
Table 27 Network > Wireless LAN > WPS Station
L ABEL
Push Button
Or input station's
PIN number
6.9 Sc he duling Sc re e n
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click
Network > Wireless LAN > Scheduling
Fig ure 42
The following table describes the labels in this screen.
Table 28 Network > Wireless LAN > Scheduling
L ABEL
Enable Wireless
LAN Scheduling
Action
Day
Chapter 6 Wireless LAN
DESC RIPT IO N
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations's wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Use this button when you use the PIN Configuration method to configure wireless station's
wireless settings. See Section 5.3.2 on page
Type the same PIN number generated in the wireless station's utility. Then click
associate to each other and perform the wireless security information synchronization.
>
Ne two rk Wire le ss L AN
DESC RIPT IO N
Select this to enable Wireless LAN scheduling.
Select or to specify whether the Wireless LAN is turned on or off. This field works in
O n O ff
conjunction with the and
Da y
Select or the specific days to turn the Wireless LAN on or off. If you select
Eve ryda y
you can not select any specific days. This field works in conjunction with the
field.
fo llo wing tim e s
WAP3205 v3 User's Guide
Section 5.3.1 on page
46.
> tab.
Sc he duling
Exc e pt fo r the fo llo wing tim e s
65
45.
to
Sta rt
fields.
Eve ryd a y
Exc e pt fo r the