Configuration Backup/Restore Screen - ZyXEL Communications WAP3205 v2 User Manual

After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.

12.7 Configuration Backup/Restore Screen

Backup configuration allows you to back up (save) the WAP3205 v2's current configuration to a file
on your computer. Once your WAP3205 v2 is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WAP3205 v2.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 79 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Table 50 Maintenance > Backup/Restore
LABEL
Backup
File Path
Browse...
Chapter 12 Maintenance
DESCRIPTION
Click Backup to save the WAP3205 v2's current configuration to your computer.
Type in the location of the file you want to upload in this field or click Browse... to find it.
Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
WAP3205 v2 User's Guide
104