Restore; The Restore Configuration Process - ZyXEL Communications max318m2w User Manual

12.15 Restore

Use this screen to restore your WiMAX Device settings from a backup file on a
local computer.
Click Maintenance > Backup/Restore > Restore to open this screen as shown
next.
Figure 96 Restore Screen
This screen contains the following fields:
Table 76 Restore
LABEL
Configuration
File
Configuration
File URL

12.15.1 The Restore Configuration Process

When the WiMAX Device restores a configuration file, the device automatically
restarts. This causes a temporary network disconnect.
Note: Do not turn off the device while configuration file upload is in progress.
If the WiMAX Device's IP address is different in the configuration file you selected,
you may need to change the IP address of your computer to be in the same
subnet as that of the default management IP address (192.168.5.1). See the
Quick Start Guide or the appendices for details on how to set up your computer's
IP address.
You might have to open a new browser to log in again.
MAX318M2W User's Guide
DESCRIPTION
Click Browse to locate a firmware upgrade file and select it.
Click File Restore to upload the specified configuration to the WiMAX
Device and replace the current settings.
Enter the URL or IP address of the backup configuration file's location
on the network.
Click URL Restore to upload the specified configuration to the WiMAX
Device and replace the current settings.
Chapter 12 Maintenance
179