Restore Configuration - ZyXEL Communications wap3205 V3 User Manual

10.4.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WAP3205 v3.
Table 35 Maintenance Restore Configuration
LABEL
Choose File
Upload
Note: Do not turn off the WAP3205 v3 while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute before
logging into the WAP3205 v3 again.
Figure 59 Configuration Restore Successful
The WAP3205 v3 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 60 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default WAP3205 v3 IP address (192.168.1.2). See
page 14 for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration screen.
Figure 61 Configuration Restore Error
Chapter 10 Tools
DESCRIPTION
Click Choose File button to find the backup file of previous configuration you saved on your
computer using the Backup button.
Click Upload to begin the upload process.
WAP3205 v3 User's Guide
78
Section 2.2 on