Checking The Load Handling Attachments - Siemens SINAMICS MV 9LD4110-7EX70-1AA0 Operating Instructions Manual

Location and display of the indicators
You can find the indicators at the following locations:
• The tilt indicators are located in the upper third of the cabinet.
If the arrow above the line
• The shock indicators are located at the bottom of the cabinet.
If one or both arrows
Figure 4-4
4.3.2

Checking the load handling attachments

• Inspect the load suspension devices, e.g. lifting lugs or eyebolts attached to the equipment,
for possible damage. Replace load suspension devices if they are damaged.
• Before use, check that the load suspension devices are correctly attached.
• When lifting, use only approved and undamaged lifting gear of sufficient rated capacity.
Check the lifting gear prior to its use.
3rd Party LCI Control Upgrade
Operating Instructions, 02/2022, A5E31872818
②
Example of attaching and displaying the shock and tilt indicators
WARNING
Danger to life as a result of damaged load suspension devices and lifting gear
If the load suspension devices and lifting gear are damaged or not correctly secured, then
the equipment may fall while being lifted and transported. This can result in death, serious
injury or material damage.
• Inspect the load handling attachments and lifting gear before use.
4.3 Inspections when receiving the delivery
①
is blued, the tilt indicator has tripped.
are black, the shock indicator has tripped.
Preparations for use
67