Using Lifting Rods - Siemens SINAMICS MV 9LD4110-7EX70-1AA0 Operating Instructions Manual

4.4.6

Using lifting rods

During transportation with a crane, force is absorbed by the supporting frame of the cabinet.
The supporting frame remains on the unit. The device is mounted at the installation site via the
supporting frame.
Note
Lifting bars
The lifting bars are not included in the scope of delivery.
Danger if the device falls
Inadequately dimensioned lifting rods are liable to bend or break. As a consequence, the device
can fall from the crane. This can result in death, serious injury or material damage.
• Use suitable lifting rods for transporting. The weight of the cabinet is indicated on the rating
NOTICE
Material damage to the drive when incorrectly lifted
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors, or
fans.
• Protect the cabinet and protruding parts against damage.
• Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Procedure
1. If there are several holes, select which holes to use based on the center of gravity.
2. Push the lifting bars through the holes.
Figure 4-7
3rd Party LCI Control Upgrade
Operating Instructions, 02/2022, A5E31872818
WARNING
plate.
Lifting bar label
Preparations for use
4.4 Transportation
71