Viewing The Glance Loop; Customizing The Glance Loop; Aviation Alerts; Setting Aviation Alerts - Garmin D2 MACH1 Owner's Manual

Name Description
Displays the current temperature and
Weather
weather forecast.
Displays laser location information when
you have a compatible Xero device
Xero ® device
paired with your D2 Mach 1 watch
Laser Location Settings,

Viewing the Glance Loop

Glances provide quick access to health data, activity
information, built-in sensors, and more. When you pair
your watch, you can view data from your phone, such as
notifications, weather, and calendar events.
1 Press UP or DOWN.
The watch scrolls through the glance loop and displays
summary data for each glance.
TIP: You can also swipe to scroll or tap to select
options.
2 Press START to view more information.
3 Select an option:
• Press DOWN to view details about a glance.
• Press START to view additional options and
functions for a glance.

Customizing the Glance Loop

You can change the order of the glances in the loop,
remove glances, and add new glances.
1 Hold MENU.
2 Select Appearance > Glances.
3 Select an option:
• Select a glance, and press UP or DOWN to change
the location of the glance in the loop.
• Select a glance, and select
from the loop.
• Select Add, and select a glance to add it to the loop.

Aviation Alerts

This watch is not intended to provide primary flight
information and is to be used for supplemental purposes
only.
Aviation alerts on your watch can notify you when you
reach certain altitudes, distances, waypoints, and more.
Appearance
page 44).
to remove the glance
WARNING

Setting Aviation Alerts

This watch is not intended to provide primary flight
information and is to be used for supplemental purposes
only.
1 From the watch face, press UP or DOWN to view the
(Xero
aviation alerts glance.
2 Press START.
3 If necessary, select Edit Alert List > Add New Alert, and
select an alert to add to the list.
4 Select an alert.
5 Select an option:
NOTE: Not all options are available for all alerts.
• To set an alert at a certain altitude, select Altitude.
• To set an alert at a certain distance, select Distance.
• To set the vibration pattern for the notification,
select Vibe Pattern.
• To set an alert when you reach a waypoint, select
Waypoint.
• To set an alert when you reach a distance or time
threshold, select Threshold.
• To update the source of METAR information, select
METAR Source.
• To set the source of model output statistics, select
MOS Source.
NOTE: Model output statistics are available for
United States airports only.
• To set the source of terminal aerodrome forecasts,
select TAF Source.
• If necessary, enter a time value, and select
6 If necessary, select Status to turn on the alert.
7 Select Enable All Alerts to enable or disable all alerts
with the Status option set to On (optional).

Altimeter

Alert altitude
Pressure altitude
Barometric pressure
WARNING
27