Table of Contents
Advertisement
3 Hold MENU.
4 Select Navigation > Last MOB.
Navigation information appears.
Stopping Navigation
1 During an activity, hold MENU.
2 Select Stop Navigation.
Courses
You can send a course from your Garmin Connect account
to your device. After it is saved to your device, you can
navigate the course on your device.
You can follow a saved course simply because it is a good
route. For example, you can save and follow a bike friendly
commute to work.
You can also follow a saved course, trying to match or
exceed previously set performance goals. For example,
if the original course was completed in 30 minutes, you
can race against a Virtual Partner trying to complete the
course in under 30 minutes.
Creating and Following a Course on Your Device
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Courses > Create New.
5 Enter a name for the course, and select
6 Select Add Location.
7 Select an option.
8 If necessary, repeat steps 6 and 7.
9 Select Done > Do Course.
Navigation information appears.
10 Press START to begin navigation.
Creating a Round-Trip Course
The device can create a round-trip course based on a
specified distance and direction of navigation.
1 From the watch face, press START.
2 Select Run or Bike.
3 Hold MENU.
4 Select Navigation > Round-Trip Course.
5 Enter the total distance for the course.
6 Select a direction heading.
The device creates up to three courses. You can press
DOWN to view the courses.
56
7 Press START to select a course.
8 Select an option:
• To begin navigation, select Go.
• To view the course on the map and pan or zoom the
map, select Map.
• To view a list of turns in the course, select Turn By
Turn.
• To view an elevation plot of the course, select
Elevation Plot.
• To save the course, select Save.
• To view a list of ascents in the course, select View
Climbs.
Creating a Course on Garmin Connect
Before you can create a course on the Garmin Connect
app, you must have a Garmin Connect account
Connect,
1 From the Garmin Connect app, select
2 Select Training > Courses > Create Course.
3 Select a course type.
4 Follow the on-screen instructions.
5 Select Done.
NOTE: You can send this course to your device
(Sending a Course to Your Device,
Sending a Course to Your Device
.
You can send a course you created using the Garmin
Connect app to your device
Connect,
1 From the Garmin Connect app, select
2 Select Training > Courses.
3 Select a course.
4 Select
5 Select your compatible device.
6 Follow the on-screen instructions.
Viewing or Editing Course Details
You can view or edit course details before you navigate a
course.
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Courses.
page 49).
(Creating a Course on Garmin
page 56).
> Send to Device.
(Garmin
or
.
page 56).
or
.
Navigation
Advertisement
Table of Contents
