Flying; Selecting A Favorite Airport; Setting The Altitude Alert; Setting The Barometric Pressure Manually - Garmin D2 MACH1 Owner's Manual

3 Select a time zone.
4 Select an option:
• To enter a custom name for the time zone, select
Rename Zone.
• To change the time zone, select Change Zone.
• To change the location of the time zone in the
glance, select Reorder Zone.
• To delete the time zone, select Delete Zone.
Do not use this watch as a primary means of navigation.
See the Important Safety and Product Information
document in the product box for product warnings and
other important information prior to use.
This watch is not intended to provide primary flight
information and is to be used for supplemental purposes
only.

Selecting a Favorite Airport

When you select a favorite airport, you can view the
waypoint and METAR information for it on the default
watch face and aviation glances.
1 Hold MENU.
2 Select Aviation > Favorite Location.
3 Select an option:
• To search for an airport by its identifier, select
Search by Ident. and enter all or part of the
alphanumeric identifier.
• To search for an airport near you, select Nearest,
and wait while the watch locates satellites.
• To select an airport from your flight plan, select
Flight Plan.
A list of airports appears.
4 Select an airport.

Setting the Altitude Alert

You can set an alarm to vibrate when you reach a
specified altitude.
NOTE: The altitude alert is not available in watch mode.
1 Hold MENU.
2 Select Aviation > Altimeter Settings > Altitude Alert >
Status > On.
3 Select Altitude.
4 Select UP to select an altitude.

Flying

Flying
WARNING

Setting the Barometric Pressure Manually

You can set the current barometric pressure manually.
This can help to improve the accuracy of the pressure
altitude reading.
1 Hold MENU.
2 Select Aviation > Altimeter Settings > Barometer >
Manual.
3 Select UP or DOWN to set the current barometric
pressure.

Viewing NEXRAD Weather Radar

Before you can view NEXRAD weather radar, you must pair
your device with your smartphone
page 47).
You can view the weather radar image associated with
your current location.
NOTE: You can customize the NEXRAD Tiles option in the
Aviation settings to download additional weather radar
images based on a direction from your current location
(Aviation Settings, page 59).
1 At any time, hold DOWN and START at the same time.
The device downloads a square of radar data for your
current GPS position, outlined in magenta. The radar
data is active for 5 minutes.
NOTE: If you are near the border of the square, you
may not see all applicable radar data.
2 If necessary, hold DOWN and START to download new
data.

Flying Activity

A flying activity starts automatically when your detected
climb rate exceeds the value you set in the auto fly
settings. The default auto fly value is 500 fpm.

Setting the Auto Fly Value

1 Hold MENU.
2 Select Activities & Apps > Fly.
3 Select the activity settings.
4 Select Auto Fly.
5 Select the auto fly value.
A flying activity starts automatically when your
detected climb rate exceeds this value.

Starting a Flight

1 From the watch face, press START.
2 Select Fly.
3 Go outside and wait while the watch locates satellites.
(Pairing Your Phone,
3