Recording A Backcountry Skiing Activity; Cross-Country Skiing Power Data; Golfing; Playing Golf - Garmin D2 MACH1 Owner's Manual

snowboarding. It automatically records new ski runs
based on your movement. The activity timer pauses when
you stop moving downhill and when you are on a chairlift.
The activity timer remains paused during the chairlift ride.
You can start moving downhill to restart the activity timer.
You can view run details from the paused screen or while
the activity timer is running.
1 Start a skiing or snowboarding activity.
2 Hold MENU.
3 Select View Runs.
4 Press UP and DOWN to view details of your last run,
your current run, and your total runs.
The run screens include time, distance traveled,
maximum speed, average speed, and total descent.

Recording a Backcountry Skiing Activity

The backcountry skiing activity lets you manually switch
between climbing and descending tracking modes so you
can accurately track your statistics.
1 From the watch face, press START.
2 Select Backcountry Ski.
3 Select an option:
• If you are starting your activity on a climb, select
Climbing.
• If you are starting your activity moving downhill,
select Descending.
4 Press START to start the activity timer.
5 Press LAP to switch between climbing and descending
tracking modes.
6 After you complete your activity, press STOP, and
select Save.

Cross-Country Skiing Power Data

You can use your compatible D2 Mach 1 device paired
with the HRM-Pro accessory to provide real-time feedback
about your cross-country skiing performance.
NOTE: The HRM-Pro accessory must be paired to the D2
Mach 1 device using ANT
Power is the force you generate while skiing. The power
output is measured in watts. Factors that affect power
include your speed, elevation changes, wind, and snow
conditions. You can use power output to measure and
improve your skiing performance.
NOTE: Skiing power values are generally lower than
cycling power values. This is normal and occurs because
humans are less efficient at skiing than they are at
cycling. It is common for ski power values to be 30 to
40 percent lower than cycling power values at the same
training intensity.

Golfing

Playing Golf

Before you play golf, you should charge the watch
(Charging the Watch, page 60).
1 From the watch face, press START.
2 Select Golf.
12
technology.
®
3 Go outside, and wait while the watch locates satellites.
4 Select a course from the list of available courses.
5 If necessary, set your driver distance.
6 Select to keep score.
7 Select a tee box.
The hole information screen appears.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
NOTE: Because pin locations change, the watch
calculates the distance to the front, middle, and back
of the green, but not the actual pin location.
8 Select an option:
• Tap the front, middle, or back distances to the green
to view the PlaysLike distance
Icons, page 14).
• Tap the map to view more detail or measure
distance with touch targeting
with Touch Targeting,
• Press UP or DOWN to view the location and distance
to a layup or to the front and back of a hazard.
• Press START to open the golf menu
page 12).
When you move to the next hole, the watch automatically
transitions to display the new hole information.

Golf Menu

During a round, you can press START to access additional
features in the golf menu.
End Round: Ends the current round.
Change Hole: Allows you to manually change the hole.
Change Green: Allows you to change the green when
more than one green is available for a hole.
(PlaysLike Distance
(Measuring Distance
page 13).
(Golf Menu,
Activities and Apps