Figure 4-14 Station Ground Point On The Expansion Cabinet Junction Panel; Figure 4-15 Cabinet Grounding - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual

Figure 4-14 Station Ground Point on the Expansion Cabinet Junction Panel

Procedure 4-4 How to Provide Grounding Connection to the Equipment Cabinet
Strip the end of the wire to be connected to the station ground point in the junction panel.
1
Using an appropriate tool, attach a crimp lug onto the cabinet ground wire. Ensure that the lug is
2
securely fastened to wire.
Use a star type and a regular lock washer, which should be placed between the screw and the
3
lug (as shown in
must have direct contact to the surface of the cabinet (no washer of any kind between the lug
and the surface to which it contacts).

Figure 4-15 Cabinet Grounding

6802800U74-N September 2009
Figure 4-15). The regular lock washer must be placed above the lug. The lug
Grounding Connection
4-19