Fru Replacement Process; Figure 7-21 Schematic Diagram Of Mts 4 Duplexer - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual

Figure 7-21 Schematic Diagram of MTS 4 Duplexer

FRU Replacement Process

For a list of available FRUs, see
Process 7-5 Replacing the MTS 4 Duplexer
Remove the Duplexer, see
1
Insert the Duplexer into the filter tray, see
2
Update the mapping list with the new unit TrackID, see
3
Removing the Duplexer
6802800U74-N September 2009
Appendix A, "Field Replaceable Units
RF energy hazard and potential equipment damage precaution: Turn off all
power to the Power Supply Unit before performing the following procedures to
prevent accidental contact with high energy and injury to personnel.
Procedure 7-10.
Procedure
FRU Replacement Process
(FRUs)".
7-11.
Procedure 7-12.
7-23