Installing Your Vap2400 (Dual Units); Step 1: Install The Access Point - Motorola vap2400 Installation Manual

Installation and Overview

Installing Your VAP2400 (Dual Units)

Follow the instructions below to install your Access Point and Client.

Step 1: Install the Access Point

1. Connect one VAP unit to your Home Gateway using the provided Ethernet cable. Before you connect the
VAP , ensure the Gateway is powered on.
2. Connect the power adapter to the VAP and plug the adapter into a wall outlet. You'll see the power LED
on the unit's front panel light green, indicating the unit is powered:
mode LED lights green, indicating the VAP is functioning as an Access Point.
VAP2400 Wireless Video Bridge • Installation Manual
or
.
Check to ensure the operational
9