Figure 4-25 110-240 Vac Connections On The Expansion Cabinet Junction Panel - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual

Figure 4-25 110-240 VAC Connections on the Expansion Cabinet Junction Panel

Procedure 4-7 How to Connect 110 – 240 VAC Power Source to Equipment Cabinet.
1
2
6802800U74-N September 2009
Make sure all power to the Power Supply Unit is switched off to prevent
accidental contact with high energy and injury to personnel.
Connect the AC cable to the AC socket (type IEC C15 line socket, Motorola P/N 3166502A01),
which is provided with the MTS.
Insert the AC socket into the AC input connector on the MTS and fix with the retaining clip as
shown in Figure 4-26. This fixture will only work with the supplied IEC connector.
110 VAC – 240 VAC Input Power Connections
4-27