Log Messages Table; Eds001 Fault Example - Emerson PACSystems RX3i User Manual

User Manual
GFK-2911E
The EDS001 logs messages internally and passes them to the CPU log. Most of these faults
are not fatal, and the basic ones are described here. Fatal and other recurrent faults should
be reported to technical support. The hardware has a larger list of possible faults; consult
the PACSystems RX7i & RX3i TCP/IP Ethernet Communications User Manual, GFK-2224 for
other fault categories.
C-1

EDS001 Fault Example

Figure 16:
All DNP3 module faults start with an Extra Data code of 1a.
The next 2 bytes define the fault category.
LOG_FILE_MEMORY
LOG_FILE_NETSTACK
LOG_FILE_DNPSlave
LOG_FILE_CFG
LOG_FILE_POINT
LOG_FILE_CREQ
LOG_FILE_DNP3PLCTASK
LOG_FILE_DEMO
LOG_FILE_MAIN
The following table is typical messages from the DNP3 Module
Table 39:
Extra Extra
Extra Bytes
Data Byte 2
4,5,6,7
Byte 1 and 3
1a 8F FF ## ## ## ##
1a 8F FF 00 00 00 02
1a 8F FF 00 00 00 03
1a 8F FF 00 00 00 04

Log Messages Table

Log Messages Table
0x6FFF
0x7FFF
0x8FFF
0x9FFF
0xBFFF
0xCFFF
0xDFFF
0xEFFF
0xFFFF
Extra Bytes
Description
8,9
The bytes 4 to 7 indicate the Major and Minor revision code for
00 01
the DNP3 Module.
00 01 Module is started, awaiting COMMREQ call.
Module is operating in Demo Mode, with Point count
00 01
restrictions.
00 01 Module is operating in production mode
Appendix C
Sep 2019
65