Dnp3 Polled Object Parameters - Analog Inputs & Outputs (Section B) - Emerson PACSystems RX3i User Manual

User Manual
GFK-2911E
DNP3 Polled Object Parameters – Analog Inputs &
Outputs (Section b)
An analog input is defined as a DNP3 Object (Analog Inputs) 30 Var 2 poll response.
Corresponding PLC memory type, memory address, and number of objects are required to
be entered. Set values for these parameters as required by the application.
Note:
Table 10:
Parameter
mComreq_Setup[38]
mComreq_Setup[39]
mComreq_Setup[40]
mComreq_Setup[41]
mComreq_Setup[42]
mComreq_Setup[43]
An analog output is defined as a DNP3 Object (Analog Outputs) 40 Var 2 poll response. PLC
memory type, memory address, and number of objects are required to be entered. Set
values for these parameters as required by the application.
Note:
Table 11:
Parameter
mComreq_Setup[44]
mComreq_Setup[45]
mComreq_Setup[46]
mComreq_Setup[47]
mComreq_Setup[48]
mComreq_Setup[49]
Analog polled objects require configuration of a corresponding data format parameter. One
parameter sets the data format for all AI polled objects; another parameter sets the data
format for all AO polled objects. Set values for these parameters as required by the
application.
Configuration of DNP3 outstation Parameters
by setting the Memory type to 0, the Object is disabled.
Value
m-type
value
0
address
value
0
number
value
0
by setting the Memory type to 0, the Object is disabled.
Value
m-type
value
0
address
value
0
number
value
0
Description
Memory Type for AI Polled Objects
Value (decimal): 8-%R, 10-%AI, 12-%AQ, 196-%W, 0-
unused
Reserved
Memory Address for AI Polled Objects
Value: 1 to maximum (based on memory type)
Reserved
Number of AI Polled Objects
Value: 1 to 1024
Reserved
Description
Memory Type for AO Polled Objects.
Value (decimal): 8-%R, 10-%AI, 12-%AQ, 196-%W, 0-
unused
Reserved
Memory Address for AO Polled Objects.
Value: 1 to maximum (based on memory type)
Reserved
Number of AO Polled Objects.
Value: 1 to 1024
Reserved
Chapter 6
Sep 2019
35