Typical Fault Messages During Power-Up - Emerson PACSystems RX3i User Manual

Rsti-ep dnp3 outstation module

Hide thumbs Also See for PACSystems RX3i:

Table of Contents

User Manual

GFK-2911E

Typical Fault Messages during Power-Up

The following messages may appear in the RX3i CPU Fault Table during a typical power-on

sequence:

Figure 12: Typical Power-Up PLC Fault Table Entries Originated by EDS001

The messages above detail the normal start-up sequence of the EDS001 module. Each line

has been keyed a thru e for each of explanation, as follows:

a. The EDS001 is operating.

b. The EDS001 is configured.

d. The firmware revision of the EDS001 module is displayed – in the example it is D302,

e. The license revision of the EDS001 is displayed in hex values 4,5,6,7 (here displaying

Refer to Appendix C: for more details, or other log messages.

Diagnostics

The EDS001 is executing and waiting for the COMMREQ configuration command.

a10e.

000000d6).

Chapter 5

Sep 2019

Table of Contents