Station Manager - Emerson PACSystems RX3i User Manual

Rsti-ep dnp3 outstation module

Hide thumbs Also See for PACSystems RX3i:

Table of Contents

User Manual

GFK-2911E

Station Manager

The RS-232 port on the ESD001 module is set up to be used as a Station Manager. Typically,

this is used for trouble-shooting and administrative purposes.

In addition to standard Station Manager commands, the EDS001 module responds to

specific Stat and Tally Station Manager commands for DNP3 information. The formats are:

•

stat a. Response displays various operating status. Note the response for technical

support.

•

tally a. Response displays various operating counters. Note the response for technical

support.

See Appendix B: for examples of these two commands.

For all other commands and responses, refer to the PACSystems TCP/IP Ethernet

Communications Station Manager User Manual, GFK-2225.

Each EDS001 will log many conditions to its own Station Manager Log, as well as to the PLC

Controller table as part of Fault Group 0x16

System Operation

Chapter 4

Sep 2019

Table of Contents