Station Manager Configuration - Emerson PACSystems RX3i User Manual

User Manual
GFK-2911E
As mentioned above, the EDS001 may be connected to separate LANs via its two Ethernet
Ports (marked Port 1A and Port 1B). The two ports are independent and should not be
connected to the same LAN. Whenever both ports are connected to active LANs, the
masters on one LAN will typically impose different real-time demands on the EDS001 than
the masters on the alternate LAN. Nonetheless, all traffic is handled per the DNP3 Outstation
configuration imposed by the COMMREQ instruction detailed in Chapter 6.
3.6

Station Manager Configuration

Use the RS-232 Port (Station Manager) tab in PAC Machine Edition to set up the Station
Manager port on the EDS001 module.
Figure 10: Station Manager Configuration Tab (Showing Defaults)
Refer to the PACSystems TCP/IP Ethernet Communications Station Manager User Manual,
GFK-2225.Details on the EDS001 Station manager specifics are found in Appendix B:.
Configuration
Chapter 3
Sep 2019
20