Ethernet Connectors; Sensors; Table; Table 3-2 Centellis 2000 User Card-10Ge Specific Sensors - Emerson Centellis 2000 Installation And Use Manual

Controls, Indicators and Connectors
3.1.2

Ethernet Connectors

A SFP+ port located on the front panel allows for Ethernet connectivity from the payload to an
external device.
3.2

Sensors

The IPMC functionality is based on the IPMI specification V1.5.
The IPMI sensors on the Centellis 2000 User Card-10GE are
information, see the Centellis 2000 User Card-10 GE: Control via IPMI Programmer's Reference.

Table 3-2

Centellis 2000 User Card-10GE
Sensor Name
HotSwap HotSwap (F0h)
Ejector_State Button (14h)
IPMC_State OEM (D5h)
IPMB0_State IPMB (F1h)
SFP_Enable Other FRU (1Ah)
SFP_TXDIS Other FRU (1Ah)
SFP_LOS Other FRU (1Ah)
SFP_TXFAULT Other FRU (1Ah)
SFP_PRESENT Other FRU (1Ah)
PMD_LOSS_SIGNAL Monitor IC (26h)
PMD_CMU_LOCK Monitor IC (26h)
32
Specific Sensors
Sensor Type Code Generate
Description Event
Hot swap sensor Yes
Ejector state
sensor
IPMC state OEM
sensor
IPMB0 state
sensor
Enable/Disable No
SFP Writable OEM
sensor
SFP TXDIS signal Yes
Loss of signal Yes
indication
SFP transmit fault Yes
SFP presence Yes
sensor
Loss of signal Yes
indication
PMD CMU Lock Yes
detect
Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
shownTable 3-2. For further
Event/ Reading Type
Code
Sensor specific (6Fh)
Sensor specific (6Fh)
Sensor specific (6Fh)
Sensor specific (6Fh)
Type enable (9)
Reading type failure (4)
Reading type failure (4)
Reading type failure (4)
Presence (8)
Reading type failure (4)
Reading type failure (4)