Light-Emitting Diode (Led) Indications - Emerson PACSystems RX3i User Manual

User Manual
GFK-2911E
5.2

Light-Emitting Diode (LED) Indications

The three LEDs in the module header provide a visual indication of the EDS001 module
status. Additionally, each RJ-45 port is equipped with a pair of LEDs to indicate the status of
the corresponding port.
Table 2:
LED
ETHERNET OK
LAN OK
LOG EMPTY
ETHERNET OK
LAN OK
LOG EMPTY
ETHERNET OK
LAN OK
LOG EMPTY
ETHERNET OK
LAN OK
LOG EMPTY
ETHERNET OK
LAN OK
LOG EMPTY
ETHERNET OK
LAN OK
LOG EMPTY
Port LEDs (one pair for Port 1A, second pair for Port 1B)
100 Mbps
LINK
Diagnostics
State
Fast Blink
Off
Off
Slow Blink
Off
Off
Slow Blink*
On/Traffic/
Off
Slow Blink*
On
On/Traffic/Off
On/Off
Blink error code
Off
Off
Slow Blink*
Slow Blink*
Slow Blink*
On
Off
Rapid Blink
Off
Indicates
Performing Diagnostics
Waiting for Ethernet
configuration from CPU
(* EOK and
STAT blink in Waiting for IP Address
unison)
Operational
Hardware failure. Refer
to PACSystems RX7i &
RX3i TCP/IP Ethernet
Communications User
Manual, GFK-2224 for
blink code definitions.
Firmware Update
(* All LEDs
(pattern is the same for
blink in
awaiting or performing
unison)
load)
100 Mbps Active
100 Mbps Not Achieved
Traffic Detected on Port
No Traffic Detected on
Port
Chapter 5
Sep 2019
25