User Manual
GFK-2911E
Grounding
Note that the EDS001 is fitted with a metal shroud which needs to be secured to the lower
rail of the RX3i rack in order to provide a path to ground for noise immunity. Two screws are
provided for this purpose. The failure to attach the shroud to the RX3i rack will likely lead to
degraded product performance in the presence of electrical noise.
See also grounding instructions for the RX3i Rack and associated hardware in the
PACSystems RX3i System Manual, GFK-2314, Chapter 2.
Cable Connection
Attach shielded twisted pair cables via one or both RJ-45 connectors. Optionally, attach the
Station Manager via the RS-232 port.
CAUTION
Some Ethernet cables come equipped with RJ-45 connectors that are oversized. Do not
exert pressure to insert oversized connectors into the RJ 45 jacks as this may result in
damage to the module.
EDS001 Module Removal
The EDS001 may be removed from its RX3i rack while the rack is still under power.
Follow the standard procedure for removing an RX3i module from its slot position, as
detailed in the PACSystems RX3i System Manual, GFK-2314 Chapter 2.
Once removed from the rack, the Ethernet connection(s) will become inactive. The RS-232
Station Manager Port will also cease to operate.
2.5
Spare Parts
There are no spare parts specific to IC695EDS001.
Installation
Chapter 2
Sep 2019
15