Description; Product Overview - Emerson PACSystems RX3i User Manual
Rsti-ep dnp3 outstation module
Hide thumbs
Also See for PACSystems RX3i:
- User manual (232 pages) ,
- Application manual (37 pages) ,
- Manual (37 pages)
Table of Contents
Advertisement
User Manual
GFK-2911E
Figure 3: Application Showing Two DNP3 LANs accessing RX3i via Two EDS001
Modules
1.2
Description
The RX3i DNP3 Outstation Module, catalog number IC695EDS001 (or EDS001), hosts the
DNP3 Outstation protocol on a common RX3i ETM001 module hardware platform. Thus,
many of the specifications and behaviors are shared with the ETM001 module.
IC695EDS001 is an Ethernet-connected module which fits in the RX3i backplane and
permits the RX3i to behave as an Outstation on the DNP3 network.
The data exchanges between the EDS001 module and up to eight DNP3 Master(s) are
configurable, using a single COMMREQ instruction in the ladder logic or Structured Text
program, as detailed in Chapter 6.
1.3
Product Overview
The RX3i DNP3 Outstation Module IC695EDS001 is an Ethernet-connected module which
fits in the RX3i backplane and permits the RX3i to behave as an Outstation on the DNP3
network, where it may interact with up to eight DNP3 masters.
Module features include:
•
Two auto-sensing RJ-45 Ethernet ports with LED indicators
•
Connects via Ethernet at 10BaseT or 100BaseTX
•
Internal network switch with Auto-negotiate, Sense, Speed, and crossover detection
•
Supports Linear (daisy-chained) and Star network configurations
•
TCP/IP and LLA protocols supported
•
One Ethernet MAC Address and one IP Address per module
•
Time synchronization to SNTP Time Server
Introduction
Chapter 1
Sep 2019
3
Advertisement
Table of Contents
