Station Manager Status - Emerson PACSystems RX3i User Manual

User Manual
GFK-2911E
The EDS001 Station Manager interface supports an additional command switch A that can
be used with the stat and tally commands to gather statistics and configuration settings
from the module. Typically, these are for tech support to use, but they can be used to debug
a system prior to engaging Emerson support. Below are examples of its usage in the STAT
and Tally Commands
STAT A
The Stat A command is designed to be self-documenting in its output, it represents many
of the configuration and operational parameters, settings, or status of the EDS001.
COM3> stat A
--------------------------------------------------------------------------------
Status of the RX3i EDS001 DNP3 Outstation 0xD302
Core Code Licensed from Triangle MicroWorks, Inc.
Application by Intelligent Platforms LLC
Development by the Intelligent Platforms LLC
Revision Major [D303] Minor [100]
Compilation Date and Time: May 5, 2014 16:32:19
--------------------------------------------------------------------------------
Basic Configuration
Maximum compiled sessions is 8. Number of specified sessions 2
The Database shutter is 250 (ms)
Accept incoming connections on 19999 (tcp ip port)
Use TCP/IP Source Station Matching 0 (when not 0)
Use DNP3 LLA Source Station Matching 0 (when not 0)
Specified LLA This Station Address 4
........................................
SOE Options
Internal buffering of SOE data, storage of multiple events per point number
MAX storage size DI=2010 AI=8010 DO=2010 AO=8010
Connections on port 19999 (tcp ip port) will not accept unsolicited enable requests
Connections on port 20000 (tcp ip port) will accept unsolicited enable requests
If Unsolicited Push Back to the Master is enabled (from the master)
After 5 Seconds, or 5 buffered events Send unsolicited on port 20000
........................................
How I See the PLC
stateOfPLCIsActive 1
cpu_state 0

Station Manager Status

Station Manager Status
Appendix B
Sep 2019
61