Table of Contents
Advertisement
Adjusting the Monitor
4
After adjustment, press the ENTER button.
The adjusted data are stored to the currently selected memory number.
To return to the MAIN MENU
Press the MENU button.
Note
Do not press the MENU button before pressing the ENTER button in step
4. If you do, the adjusted data are not stored in the memory.
44
Adjustment
Selecting the memory number/adjusting the monitor by recalling the
stored conditions
By selecting the memory number, you can change the monitor screen to
the conditions stored to that memory number.
When you want to store the image position and boundary data to the
specified memory number after adjustment, you should select the memory
number before the adjustment, performing the following steps.
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the v or V button to select SIGNAL CONTROL and press the
ENTER button.
The SIGNAL CONTROL menu appears.
* * * * * * M A I N M E N U * * * * * *
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
3
Press the v or V button to select the input (INPUT-1 or INPUT-2) and
press ENTER button.
The SIG-CTRL menu appears.
* * S I G - C T R L < I N P U T - 1 > * *
C O L O R :
H U E :
S H A R P N E S S :
G E O M E T R Y M E M N O .
M O N I T O R
f H : 1 5 . 7 5 K H z
f V : 6 0 . 0 0 H z
S I G - T Y P E : N T S C
I N P U T - 1 :
4
Select the memory number.
Press the v or V button to select MONITOR MEM NO. and press the
B or b button to select the memory number 0 – 31 to which the desired
conditions are stored.
* * S I G - C T R L < I N P U T - 1 > * *
C O L O R :
H U E :
S H A R P N E S S :
G E O M E T R Y M E M N O .
M O N I T O R
f H : 1 5 . 7 5 K H z
f V : 6 0 . 0 0 H z
S I G - T Y P E : N T S C
I N P U T - 1 :
5
Press the ENTER button.
The monitor is adjusted to the conditions stored to the selected
memory number.
To return to the MAIN MENU
Press the MENU button.
* * * S I G N A L C O N T R O L * * *
I N P U T - 1
I N P U T - 2
3 2
3 2
7
1
M E M N O .
1
C O M P O S I T E
3 2
3 2
7
1
M E M N O .
1
Monitor memory number
C O M P O S I T E
45
Adjustment
Advertisement
Table of Contents
