Table of Contents
Advertisement
Displaying the Software Version of the JME-SA200
You can display the version of the software installed in this controller in
the display window.
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the v or V button to select OTHER CONTROL and press the
ENTER button.
The OTHER CONTROL menu appears.
* * * * * * M A I N M E N U * * * * * *
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
3
Press the v or V button to select PRODUCT INFO and press ENTER
button.
The information about the software version appears in the display
window.
* * * * P R O D U C T I N F O * * * *
N a m e - - - - - - - S A 2 0 0
V e r s i o n - - - - 1 . 0 0
s a 2 0 0 s y s - 1 . 0 0
s a 2 0 0 k b d - 1 . 0 0
s a 2 0 0 d s p - 1 . 0 0
s a 2 0 0 r x
s a 2 0 0 t x
s a 2 0 0 u s r - 1 . 0 0
s a 2 0 0 r x p - 1 . 0 0
s a 2 0 0 t x p - 1 . 0 0
To stop displaying the information
Press the MENU button.
48
Adjustment
* * * * O T H E R C O N T R O L * * * *
S C R E E N I N F O
P R O D U C T I N F O
- 1 . 0 0
- 1 . 0 0
Troubleshooting
If you think you have a problem during operation, check through the
following list.
Problem
Cause
The title display does not
The battery pack is not attached
appear after the power has
to the unit.
been turned on and four
The battery is exhaused
seconds or more have
completely.
elapsed.
The MAIN MENU does not
The unit is not connected to the
appear in the display
ICU controller properly. (for wired
window.
control)
The digital data card is not
inserted correctly. (for wireless
control)
The cellular phone is not
connected to the unit properly.
(for wireless control)
The menu or the data on
The phone number for the modem
the display does not
has not been registered.
change even if the button
The cellular phone is not
is pressed. (for wireless
connected to the unit properly.
control)
The communication has
interrupted.
The battery for the cellular phone
is exhaused.
Corrective action
Attach the battery pack.
Charge the battery.
Check the connections.
Insert the card fully into the slot.
Check the cellular phone connections.
Remove the cause of the problem, turn the power on and
establish communcation again. Perform the adjustment from
the stage in which you have pressed the ENTER button.
49
Others
Advertisement
Table of Contents
