Connections For Using As Wireless Controller - Sony JumboTron JME-SA200 Service Manual

Connections

Connections for using as wireless controller

By connecting the unit to a cellular phone via the digital data card inserted
into the unit, interactive data communication can be established between
the unit and the JTC-C200 ICU controller using a public telephone system.
Connecting diagram
JME-SA200 Cellular phone
Digital data card
Inserting the digital data card
Prepare a cellular phone, digital data card and connecting cable (not
supplied).
For usable equipment, consult with your Sony distributor.
1
Press the EJECT button using the supplied eject tool, and remove the
dummy card.
Eject tool
2
Insert the digital data card into the PC CARD slot.
14
Power Source and Connections Overview
JTC-C200 ICU controller
Public COM 2
telephone line
Modem
Dummy card
3
Connect the connecting cable of the card to the cellular phone.
4
Register the phone number for the modem connected to the ICU
controller.
For registering the phone number, see "Registering the Phone Number for the
Modem" on page 17.
Storing the eject tool
You can tie the eject tool to the shoulder strap attachment as illustrated.
Removing the digital data card
1
Press the EJECT button using the supplied eject tool, and remove the
digital data card.
2
Insert the dummy card into the slot.
When the unit is not used as a wireless controller
Be sure to insert the dummy card into the PC CARD slot to prevent dust
entering the unit.
Eject tool
15
Power Souce and Connections
Overview