Saving And Recalling Adjustments And Settings; Saving Adjustments And Settings; Recalling Adjustments And Settings - Sony HKDV-503 Operation Manual

Saving and Recalling Adjustments and Settings

You can save up to 99 sets of settings in memory and
recall them as needed. Each set consists of the settings
for each output signal and the system settings.
Saving Adjustments and
Settings
2
1
Press the STORE button.
The MEMORY ADDR. indicator flashes.
When DIP switch 2 on the internal board is set to
the ON position, the memory address is displayed.
2
Check the memory address shown by the
MEMORY ADDR. indicator, and if necessary
change it.
The addresses are in the range 01 to 99.
Press the + button to increase the address, and the
– button to decrease the address.
3
Press the STORE button once again.
This saves the settings, and the flashing is stopped.
When DIP switch 2 on the internal board is set to
the ON position, the MEMORY ADDR. indicator
returns to showing adjustment and setting values.
To cancel the operation
Press the CANCEL button.
12
1,3
Recalling Adjustments and
Settings
2
1
Press the LOAD button.
The MEMORY ADDR. indicator flashes.
When DIP switch 2 on the internal board is set to
the ON position, the memory address is displayed.
2
Change the memory address displayed in the
MEMORY ADDR. indicator to the desired address
to be recalled.
Press the + button to increase the address, and the
– button to decrease the address.
3
Press the LOAD button once again.
This saves the settings, and the flashing is stopped.
When DIP switch 2 on the internal board is set to
the ON position, the MEMORY ADDR. indicator
returns to showing adjustment and setting values.
To cancel the operation
Press the CANCEL button.
1,3