Testing New Batteries - Powerware 5119 User Manual

1000 VA Models
1500 VA Models

Testing New Batteries

Press and hold the
After the test is finished, the red Battery Service indicator should turn
off and the Battery Charge LEDs should show a charge. If the Battery
Service indicator stays on, check the battery connections. See the
troubleshooting guide on page 33 or call your service representative if
the problem persists.
Powerware 5119 User's Guide
®
4. Remove the old battery. See "Recycling the Batteries" on
page 24 for proper disposal.
5. Connect the new batteries to the UPS as shown in Figure 16
and reinstall.
Black Cable from UPS
Negative
Terminal
(Black)
Figure 16. Internal Battery Connections
:
www.powerware.com
Red Cable from UPS
button for three seconds to initiate a self-test.
UPS Maintenance
Positive Terminal
Black Cable from UPS
Negative Terminal
Red Connector
from UPS
Red Battery Connector
23