Installing And Connecting Batteries; Important Safety Instructions - Powerware 9320 Installation And Operation Manual

Installing and Connecting Batteries

3.1 Important Safety Instructions

The Powerware 9320-C03 UPS does not contain batteries. It must, however, be used
with a properly configured battery cabinet or rack with a properly sized battery system for
proper operation.
The Powerware 9320-C02 UPS uses internal batteries. For extended runtime
applications, it may also be used with a properly configured battery cabinet or rack with a
properly sized battery system for proper operation.
The standard batteries of the Powerware 9320 two module system are sealed,
maintenance-free batteries, internally mounted and will typically be connected at the
time the UPS is commissioned.
The battery life depends very much on the ambient temperature. A temperature
range between +18° and +23°C will achieve the optimum battery life.
If the UPS is delivered without batteries, Powerware is not responsible for any
damage or malfunctioning caused to the UPS by incorrect wiring.
The installation of batteries should be performed or supervised by personnel
knowledgeable of batteries and their associated precautions. Keep unauthorized
personnel away from batteries.
CAUTION:
Refer to the battery manufacturers installation manual for battery installation
and maintenance instructions.
Powerware 9320 (10 kVA and 20 kVA) Installation and Operation
164201416 REV A 071103
3
3-1