The Multicast group VLAN member must be configured first, and then setup the Static Routing
NOTE:
Port. Or the function will not work properly.
VLAN configure
4.
Set the VLAN mode to be 802.1Q VLAN
5.
At Step-3, we had set Port-2 as VLAN 6 Static Routing Port, so we have to configure Port-2 as VLAN 6
member port.
6.
Cooperate with IGMP Snooping,and 802.1Q VLAN,Port-6 of VLAN 2 and Port-7 of VLAN 3 are able to
receive the Multicast group traffic from Port-2 with different VLAN groups setting
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-86-