■ Gigabit TP/SFP interface (Port-9, WGSD-910), (Port-9, Port-10, WGSD-1022C)
LED
Color
LNK/ACT
Green
SPEED
Orange
2.1.4 Switch Rear Panel
Figure 2-4 shows the rear panel of WSD-800.
Figure 2-5 shows the rear panel of WGSD-910 / WGSD-1022C.
1.
Power Notice:
2.
Lights to indicate the link through that port is successfully established.
Blink: indicate that the Switch is actively sending or receiving data over that
port.
Lights to indicate the port is running in 1000Mbps speed.
Off: indicate that the port is operating at
Figure 2-4 WSD-800 rear panel.
Figure 2-5 WGSD-910 / WGSD-1022C rear panel.
The device is a power-required device, it means, it will not work till it is powered. If
your networks should active all the time, please consider using UPS (Uninterrupted
Power Supply) for your device. It will prevent you from network data loss or network
downtime.
In some area, installing a surge suppression device may also help to protect your
Switch from being damaged by unregulated surge or current to the Switch or the
power adapter.
-12-
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
Function
10Mbps or 100Mbps.