1. Manuals
  2. Brands
  3. Planet Manuals
  4. Network Router
  5. WAP-200N
  6. User manual

Planet WAP-200N User Manual

300mbps 802.11n outdoor wireless ap/cpe
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
I

Advertisement

Table of Contents
loading

Related Manuals for Planet WAP-200N

Summary of Contents for Planet WAP-200N

  • Page 2: Fcc Interference Statement

    Copyright Copyright  2017 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.

  • Page 3: Fcc Radiation Exposure Statement

    Do not dispose of WEEE as unsorted municipal waste; WEEE should be collected separately. Revision User Manual of PLANET 2.4GHz 300Mbps 802.11n Outdoor Wireless AP/CPE Model: WAP-200N/WBS-200N Rev: 1.0 (August, 2017) Part No. EM-WAP-200N_WBS-200N_v1.0...

  • Page 4: Table Of Contents

    CONTENTS Chapter 1. Product Introduction ......................7 Package Contents ....................... 7 Product Description ......................8 Product Features ....................... 10 Product Specifications ..................... 11 Chapter 2. Hardware Installation ......................14 Hardware Description ....................... 14 2.1.1 The Bottom Panel ....................16 Chapter 3. Connecting to the AP ......................18 Preparation before Installation ..................
  • Page 5 5.6.11 Diagnostics ......................94 5.6.12 Logout ........................95 Appendix A: Troubleshooting ......................96 Appendix B: Use Planet Smart Discovery to find AP ..............98 Appendix C: FAQ ..........................99 Q1: How to set up the AP Client Connection ................99...
  • Page 6 FIGURES 2-1 T (WAP-200N) ......................14 IGURE HREE 2-2 T (WBS-200N) ......................14 IGURE HREE 2-3 R (WAP-200N) ........................ 15 IGURE ANEL 2-4 R (WBS-200N) ........................ 15 IGURE ANEL 2-5 B (WAP-200N/WBS-200N) ..................17 IGURE OTTOM ANEL 2-6 P ........................17...
  • Page 7 5-26 WAN S – PPPOE ........................ 63 IGURE ETTINGS 5-27 WAN S – PPTP ........................64 IGURE ETTINGS 5-28 VPN P ........................65 IGURE HROUGH 5-29 P .......................... 66 IGURE ORWARDING 5-30 P .......................... 67 IGURE ORWARDING 5-31 DMZ ............................... 68 IGURE 5-32 W –...

  • Page 8: Chapter 1. Product Introduction

    User Manual of WAP-200N/WBS-200N Chapter 1. Product Introduction 1.1 Package Contents Thank you for choosing PLANET WAP-200N/WBS-200N series. Before installing the AP/CPE, please verify the contents inside the package box. WBS-200N / WAP-200N Quick Installation Guide Mounting Strap x 2 Screw Set x 1 PoE Injector &...

  • Page 9: Product Description

    Designed for Various Requirements The WAP-200N/WBS-200N is dedicatedly designed for WISP solution that provides CPE users with Internet access via the WISP provider in rural areas. Besides, it caters to various wireless communication connectivities (AP, Client, WDS, Repeater and WISP), thus meeting users’ application requirements.
  • Page 10 WAP-200N/WBS-200N is easy to limit the client access and inbound/outbound bandwidth control, even for users who have no experience in setting up a wireless network. Furthermore, with the Planet Smart Discovery Utility, SNMP and diagnostics tools, the WAP-200N/WBS-200N is convenient to be managed...

  • Page 11: Product Features

     Self-healing mechanism through system auto reboot setting  System status monitoring through remote Syslog Server and Device Discovery  Diagnostic tools include Ping, Traceroute, Speed  Planet Smart Discovery Utility allows administrator to discover and locate each AP -10-...

  • Page 12: Product Specifications

    User Manual of WAP-200N/WBS-200N 1.4 Product Specifications WAP-200N WBS-200N Product 2.4GHz 300Mbps 802.11n Outdoor Wireless AP/CPE Hardware Features IEEE802.11b/g/n IEEE 802.3 Standard Support IEEE 802.3u IEEE 802.3x 64 Mbytes DDR SDRAM Memory 16 Mbytes Flash Passive PoE Wireless IEEE 802.11b/g/n, 2T2R...
  • Page 13 User Manual of WAP-200N/WBS-200N Media Access Control CSMA/CA Transmission/Emission type: OFDM Modulation Data Modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM Frequency Band 2.412GHz ~ 2.472GHz United States -- FCC: 2.414~2.462GHz (11 channels) Operating Channel Europe -- ETSI: 2.412~2.472GHz (13 channels) FCC: IEEE 802.11b/g/n: up to 26 ±...
  • Page 14 User Manual of WAP-200N/WBS-200N Offers DoS protection to guard user's content network against DoS attacks Built-in DMZ and Port Forwarding VPN Pass-through: Firewall  PPTP Pass-through  L2TP Pass-through  IPSec Pass-through Channel Width 20MHz/40MHz Encryption Type 64-/128-/152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X...

  • Page 15: Chapter 2. Hardware Installation

    User Manual of WAP-200N/WBS-200N Chapter 2. Hardware Installation 2.1 Hardware Description  Dimensions (W x D x H): 100 x 29 x 186mm (without antennas)/100 x 29 x 380mm (with 5dBi antennas) Figure 2-1 Three-way View (WAP-200N) Figure 2-2 Three-way View (WBS-200N) -14-...

  • Page 16: Figure 2-3 Rear Panel (Wap-200N)

    User Manual of WAP-200N/WBS-200N Rear Panel – LED Figure 2-3 Rear Panel (WAP-200N) Figure 2-4 Rear Panel (WBS-200N) -15-...

  • Page 17: The Bottom Panel

    Signal is poor mode only) Table 2-1 The LED indication 2.1.1 The Bottom Panel The Bottom panel provides the physical connectors connected to the power adapter and any other network device. Figure 2-5 shows the bottom panel of the WAP-200N/WBS-200N. -16-...

  • Page 18: Figure 2-5 Bottom Panel (Wap-200N/Wbs-200N)

    User Manual of WAP-200N/WBS-200N Bottom Panel Figure 2-5 Bottom Panel (WAP-200N/WBS-200N) PoE Warning Label Figure 2-6 PoE Warning Label Hardware Interface Definition Object Description Antenna Connectors 2 RP-SMA (Female) antenna connectors (WAP-200N only) 10/100Mbps RJ45 port, auto MDI/MDI-X Passive PoE/PD supported, 24V DC In...

  • Page 19: Chapter 3. Connecting To The Ap

    To keep you safe and install the hardware properly, please read and follow these safety precautions. If you are installing the WBS-200N or WAP-200N for the first time, for your safety as well as others’, please seek assistance from a professional installer who has received safety training on the hazards involved.
  • Page 20 User Manual of WAP-200N/WBS-200N OUTDOOR INSTALLATION WARNING IMPORTANT SAFETY PRECAUTIONS: LIVES MAY BE AT RISK! Carefully observe these instructions and any special instructions that are included with the equipment you are installing. CONTACTING POWER LINES CAN BE LETHAL. Make sure no power lines are anywhere where possible contact can be made.

  • Page 21: Installing The Ap

    Figure 3-1 PoE and LAN port connection Step 2. Attach the antennas onto the antenna connectors of the device and place the bottom cover back into the device to finish the installation. Figure 3-2 Finish installation and connect to antennas (WAP-200N only) -20-...

  • Page 22: Figure 3-3 Pole Mounting

    User Manual of WAP-200N/WBS-200N Step 3. Pole Mounting: (1) Thread two mounting straps through the mounting bracket on the back of the device. (2) Position the device on a pole and secure both mounting straps to finish the installation. Figure 3-3 Pole Mounting Step 4.

  • Page 23: Chapter 4. Quick Installation Guide

    Connect the WBS-200N or WAP-200N with your PC via an Ethernet cable which is then plugged into a LAN port of the PoE injector with one end and into a LAN port of the PC with the other end. Then power on the WBS-200N and WAP-200N via PoE injector or PoE switch.
  • Page 24 User Manual of WAP-200N/WBS-200N Figure 4-1 TCP/IP Setting Now click OK to save your settings. Now, you can run the ping command in the command prompt to verify the network connection between your PC and the AP. The following example is in Windows 7 OS. Please follow the Steps below: Click on Start >...

  • Page 25: Figure 4-2 Windows Start Menu

    User Manual of WAP-200N/WBS-200N Figure 4-2 Windows Start Menu Open a command prompt and type ping 192.168.1.253, and then press Enter. If the result displayed is similar to Figure 4-3, it means the connection between your PC and the AP has been established well.

  • Page 26: Starting Setup In The Web Ui

    DHCP request on newly installed adapters. 4.2 Starting Setup in the Web UI It is easy to configure and manage the WBS-200N or WAP-200N with the web browser. Step 1. To access the configuration page, open a web browser and enter the default IP address http://192.168.1.253...

  • Page 27: Figure 4-7 Web Ui Screenshot

    User Manual of WAP-200N/WBS-200N Default IP Address: 192.168.1.253 Default User Name: admin Default Password: admin If the above screen does not pop up, it may mean that your web browser has been set to a proxy. Go to Tools menu> Internet Options> Connections> LAN Settings in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.

  • Page 28: Chapter 5. Configuring The Ap

    User Manual of WAP-200N/WBS-200N Chapter 5. Configuring the AP This chapter instructs you how to quickly configure the AP/CPE in different operation modes. 5.1 Operation Mode On this page, you can select different operation modes of the AP depending on your application, including:...

  • Page 29: Figure 5-1 Operation Mode - All

    User Manual of WAP-200N/WBS-200N Figure 5-1 Operation Mode – All The page includes the following settings: Object Description Enter a name for the device (1-32 characters). The name you type • Device Name appears in SNMP management. This name is not the SSID and is not broadcast to other devices.

  • Page 30: Access Point (Ap)

    User Manual of WAP-200N/WBS-200N 5.1.1 Access Point (AP) This section allows you to configure the AP Bridge mode to provide wireless connectivity for wireless clients. Go to the “System  Operation Mode” page to configure the device as “Access Point” and then go to “Wireless ...

  • Page 31: Client Bridge (Cb)

    User Manual of WAP-200N/WBS-200N 5.1.2 Client Bridge (CB) This section allows you to configure the Client Bridge mode. In this mode, the device enables the wired client to be connected to the central site through wireless interface. Go to the “System  Operation Mode” page to configure the device as “Client Bridge” and then go to “Wireless ...

  • Page 32: Wds Access Point (Wds Ap)

    User Manual of WAP-200N/WBS-200N 5.1.3 WDS Access Point (WDS AP) This section allows you to configure the WDS AP mode. In this mode, the device is acting as master AP in the WDS connection. Go to the “System  Operation Mode” page to configure the device as “WDS Access Point” and then go to “Wireless ...

  • Page 33: Wds Station (Wds Sta)

    User Manual of WAP-200N/WBS-200N 5.1.4 WDS Station (WDS STA) This section allows you to configure the WDS Station mode. In this mode, the device is acting as slave AP in the WDS connection. Go to the “System  Operation Mode” page to configure the device as “WDS Station” and then go to “Wireless ...

  • Page 34: Wds Bridge (Wds Ptp/Wds Ptmp)

    User Manual of WAP-200N/WBS-200N 5.1.5 WDS Bridge (WDS PtP/WDS PtMP) This section allows you to configure the WDS Bridge mode. In this mode, the device is bridging to remote node through wireless MAC address. When suppressed SSID broadcast is checked, unknown wireless clients are not allowed to connect to the AP.
  • Page 35 User Manual of WAP-200N/WBS-200N Step 2. Go to the “System  IP Settings” page to configure LAN IP of central site and remote site. The LAN IP must be different at both sites. In this example, the master AP at the central site is configured to 192.168.1.252 and the slave AP at remote site is configured to 192.168.1.253.
  • Page 36 User Manual of WAP-200N/WBS-200N Step 3. Go to the “Wireless  Wireless Network” page to configure the wireless parameters of the WDS link. In this example, we set the channel to 6 and channel width to 40MHz. (1) Channel HT Mode: set to 40MHz for wider bandwidth to optimize performance (2) Channel/Frequency: set to a fixed channel.
  • Page 37 User Manual of WAP-200N/WBS-200N Step 5. If the connection range exceeds 1km, go to the “Wireless Wireless Advanced Settings” page to configure the distance parameter between two sites. (3) In PtP, the distance must be configured to the same at both sites.
  • Page 38 User Manual of WAP-200N/WBS-200N Step 6. Go to the “Status -> Save/Reload” page to save and apply settings. Step 7. Repeat Steps1 to 6 for each node. -37-...
  • Page 39 User Manual of WAP-200N/WBS-200N Step 8. Go to the “Status -> WDS Link List” page to check the connection status. -38-...

  • Page 40: Client Router (Cr/Wisp)

    User Manual of WAP-200N/WBS-200N 5.1.6 Client Router (CR/WISP) This section allows you to configure the Client Router (Wireless ISP) mode to enable clients to access Internet through remote wireless AP provided by ISP. In this mode, the DHCP server is enabled and able to assign IP address to local clients after the device is connected to remote wireless AP provided by ISP.
  • Page 41 User Manual of WAP-200N/WBS-200N Step 2. Go to the “Router  LAN Settings” page to configure LAN IP and enable the DHCP server. The LAN IP must be a different subnet from the remote wireless AP provided by ISP. Step 3. Go to the “Wireless  Wireless Network” page to click the Site Survey button to discover the root AP.
  • Page 42 User Manual of WAP-200N/WBS-200N Step 4. Click the root AP as shown below and it will go back to the previous wireless network page. Step 5. Click the check box of the preferred BSSID and configure the encryption to be the same as the root AP.
  • Page 43 User Manual of WAP-200N/WBS-200N Step 6. Go to the “Router -> WAN Settings” page to configure WAN settings. The Internet connection type is provided by your ISP and should be configured properly. Disable “Discard Ping on WAN” and then you’ll be able to use ping test tool of Diagnostics page to ping DNS to ensure the WAN connection is established properly through WISP mode.
  • Page 44 User Manual of WAP-200N/WBS-200N Step 7. Go to the “Status -> Save/Reload” page to save and apply settings. Step 8. Modify your PC/laptop connected to the LAN port of this client router to “Obtain an IP address automatically”. -43-...
  • Page 45 User Manual of WAP-200N/WBS-200N Step 9. Go to “Status -> DHCP Client Table” to ensure your PC/laptop receives the IP automatically. Step 10. Go to “Status -> Connection Status” to check whether the connection is established successfully. -44-...

  • Page 46: Repeater

    User Manual of WAP-200N/WBS-200N 5.1.7 Repeater This section allows you to configure the Repeater mode to extend the root AP’s signal coverage. Go to the “System  Operation Mode” page to configure the device as “Repeater” and then go to “Wireless ...
  • Page 47 User Manual of WAP-200N/WBS-200N Step 2. Go to the “Wireless  Wireless Network” page to click the Site Survey button to discover the root AP. Step 3. Click the root AP as shown below and it will go back to the previous wireless network page.
  • Page 48 User Manual of WAP-200N/WBS-200N Step 4. Click the check box of the preferred BSSID and configure the encryption to be the same as the root AP. The Repeater SSID can be modified to an easily-recognized name for wireless clients. Then, click “Accept” to save the configurations.
  • Page 49 User Manual of WAP-200N/WBS-200N Step 6. Use a wireless client to connect to the repeater AP and ensure it is able to receive IP address from the root AP’s network. -48-...

  • Page 50: Status

    User Manual of WAP-200N/WBS-200N 5.2 Status This section provides the current system summary, system log and connection status including Wireless Client List, WDS Link List, DHCP Client Table and Connection Status to assist the administrator in viewing the network status.

  • Page 51: Figure 5-11 Main Status

    User Manual of WAP-200N/WBS-200N Figure 5-11 Main Status -50-...

  • Page 52: Save/Reload

    User Manual of WAP-200N/WBS-200N The page includes the following settings: Object Description Shows the general system information such as device name, MAC • System Information address, country, current time, and firmware version. Shows Local Area Network settings such as the LAN IP address, subnet •...

  • Page 53: Wireless Client List

    User Manual of WAP-200N/WBS-200N Figure 5-13 Save/Reload - Default 5.2.3 Wireless Client List Click “Status  Wireless Client List” to view the current associated client. Figure 5-14 Wireless Client List Figure 5-15 Kick the client The page includes the following settings:...

  • Page 54: Wds Link List

    User Manual of WAP-200N/WBS-200N 5.2.4 WDS Link List Click “Status  WDS Link List” to view the current WDS link client. The WDS Link List is only available in WDS Bridge mode. Figure 5-16 WDS Link Status The page includes the following settings:...

  • Page 55: Connection Status

    User Manual of WAP-200N/WBS-200N • Revoke Click Revoke to revoke the DHCP lease of the client. • Reserve Click Reserve to reserve the IP to the client. • Refresh Click Refresh to update the client list. 5.2.6 Connection Status Click “Status  Connection Status” to view the current DHCP client.

  • Page 56: System Log

    User Manual of WAP-200N/WBS-200N • Current noise level The current noise level of the connection • Signal Strength The current signal strength of the connected AP. • Refresh Click Refresh to update the current data. 5.2.7 System Log Click “Status  System Log” to view the system log.

  • Page 57: System

    User Manual of WAP-200N/WBS-200N 5.3 System 5.3.1 IP Settings Click “System  IP Settings” to configure the LAN IP address. Figure 5-20 LAN IP Settings The page includes the following settings: Object Description Select Obtain an IP address automatically (DHCP) to receive the IP •...

  • Page 58: Spanning Tree Settings (Stp)

    User Manual of WAP-200N/WBS-200N • IPv6 IP Address Enter the IPv6 LAN IP of the AP. • IPv6 Subnet Prefix Length Enter the secondary DNS server of the AP. • IPv6 Default Gateway Enter the IPv6 Gateway IP address of the AP.

  • Page 59: Router (Wisp Mode Only)

    User Manual of WAP-200N/WBS-200N Forwarding state is entered. This delay is provided so that when a new bridge comes onto a busy network, it looks at some traffic before participating. • Priority Specify the Priority number. Smaller numbers have greater priority.

  • Page 60: Wan Settings

    User Manual of WAP-200N/WBS-200N • Ending IP Address Specify the ending IP address for the DHCP range. • WINS Server IP Enter the IP address of the WINS server. • Accept Click Accept to apply the setting. • Cancel Click Cancel to cancel the setting.

  • Page 61: Dhcp

    User Manual of WAP-200N/WBS-200N assigned a different address. • PPPoE: Point-to-Point Protocol over Ethernet (PPPoE) is used mainly by ISPs that provide DSL modems to connect to the Internet. • PPTP: The point-to-point tunneling protocol (PPTP) is used in association with virtual private networks (VPNs).

  • Page 62: Static Ip

    User Manual of WAP-200N/WBS-200N Figure 5-24 WAN Settings – DHCP The page includes the following specific settings in DHCP type: Object Description • Account Name (if required) Enter the account name provided by your ISP. • Domain Name (if required) Enter the domain name provided by your ISP.
  • Page 63 User Manual of WAP-200N/WBS-200N Figure 5-25 WAN Settings – Static IP The page includes the following specific settings in Static IP type: Object Description • Account Name (if required) Enter the account name provided by your ISP. • Domain Name (if required) Enter the domain name provided by your ISP.

  • Page 64: Pppoe

    User Manual of WAP-200N/WBS-200N 5.4.2.3. PPPoE Select PPPOE if ISP is using a PPPoE connection and provide you with PPPoE user name and password. Figure 5-26 WAN Settings – PPPOE The page includes the following specific settings in PPPoE type:...

  • Page 65: Pptp

    User Manual of WAP-200N/WBS-200N automatically connect when user tries to access the network. Select whether to keep the Internet connection always on, or enter a • Keep Alive redial period once the internet loses connection. • Accept Click Accept to apply the setting.

  • Page 66: Vpn Pass Through

    User Manual of WAP-200N/WBS-200N The page includes the following specific settings in PPTP type: Object Description The maximum transmission unit (MTU) specifies the largest packet size • MTU permitted for an internet transmission. The factory default MTU size for PPTP is 1400. The MTU size can be set between 1200 and 1400.

  • Page 67: Port Forwarding

    User Manual of WAP-200N/WBS-200N The page includes the following settings: Object Description • PPTP Pass Through Check this option to enable PPTP pass-through mode. • L2TP Pass Through Check this option to enable L2TP pass-through mode. • IPSec Pass Through Check this option to enable IPSec pass-through mode.

  • Page 68: Dmz Settings

    User Manual of WAP-200N/WBS-200N When clicking Add Entry, the following window will pop up and fill in the fields required to add a new forwarding rule. Figure 5-30 Port Forwarding The page includes the following settings: Object Description • Service Name Enter a name for the port forwarding rule.

  • Page 69: Wireless

    User Manual of WAP-200N/WBS-200N Figure 5-31 DMZ The page includes the following settings: Object Description • DMZ Hosting Select Enable DMZ to activate DMZ functionality. • DMZ Address Enter an IP address of a device on the LAN. • Accept Click Accept to apply the setting.

  • Page 70: Figure 5-32 Wireless Network - Ap/Wds Ap Mode

    User Manual of WAP-200N/WBS-200N Figure 5-32 Wireless Network – AP/WDS AP Mode In the AP/WDS AP mode, click the Edit button on the “Wireless Network” page to enter the “SSID Profile” page to configure the SSID profile for the wireless network.
  • Page 71 User Manual of WAP-200N/WBS-200N The page includes the following settings: Object Description • Wireless Mode Wireless mode supports 802.11b/g/n mixed modes. The default channel bandwidth is 20/40MHz. The larger the channel, the • Channel HT Mode better the transmission quality and speed.

  • Page 72: Wds Link Settings

    User Manual of WAP-200N/WBS-200N Figure 5-34 Wireless Network – CB/WDS STA/CR/Repeater Mode The page includes the following settings: Object Description • Wireless Mode Wireless mode supports 802.11b/g/n mixed modes. Specify the SSID if known. This field is completed automatically if you •...
  • Page 73 User Manual of WAP-200N/WBS-200N Figure 5-35 WDS Link Settings – WDS Bridge Mode The page includes the following settings: Object Description • Security Select the type of WDS security: None, WEP, or AES. • WEP Key Enter the WEP key if select security as WEP.

  • Page 74: Security Settings

    User Manual of WAP-200N/WBS-200N 5.5.3 Security Settings Go to the “Wireless  Wireless Network” page to configure the security settings. In the AP/WDS AP mode, click the Edit button on the “Wireless Network” page to enter the “SSID Profile” page and configure the wireless security for the wireless network.

  • Page 75: Figure 5-38 Security Settings - Wds Bridge Mode

    User Manual of WAP-200N/WBS-200N In the WDS Bridge mode, select Security Mode on the “WDS Link Settings” page to configure the wireless security settings. The security settings in each site of the WDS link must be configured to the same.

  • Page 76: Figure 5-39 Security Settings - Wep

    User Manual of WAP-200N/WBS-200N Figure 5-39 Security Settings – WEP The security mode includes the following settings: Object Description Select WEP from the drop-down list to configure the wireless network • Security Mode using WEP encryption method. • Auth Type Select Open System or Shared.

  • Page 77: Figure 5-40 Security Settings - Wpa-Psk

    User Manual of WAP-200N/WBS-200N  WPA-PSK Figure 5-40 Security Settings – WPA-PSK The security mode includes the following settings: Object Description Select WPA-PSK from the drop-down list to configure the wireless • Security Mode network using WPA-PSK encryption method. Select Both, TKIP, or AES as the encryption type.

  • Page 78: Figure 5-41 Security Settings - Wpa2-Psk

    User Manual of WAP-200N/WBS-200N Figure 5-41 Security Settings – WPA2-PSK The security mode includes the following settings: Object Description Select WPA2-PSK from the drop-down list to configure the wireless • Security Mode network using WPA2-PSK encryption method. Select Both, TKIP, or AES as the encryption type.

  • Page 79: Figure 5-43 Security Settings - Wpa (Wpa Enterprise)

    User Manual of WAP-200N/WBS-200N Select WPA-PSK Mixed from the drop-down list to configure the wireless • Security Mode network using WPA-PSK Mixed encryption method. Select Both, TKIP, or AES as the encryption type.  Both: uses TKIP and AES. • Encryption ...

  • Page 80: Figure 5-44 Security Settings - Wpa2 (Wpa2 Enterprise)

    User Manual of WAP-200N/WBS-200N • Radius Server Specify the IP address of the RADIUS server. Specify the port number that your RADIUS server uses for authentication. • Radius Port Default port is 1812. • Radius Secret Specify RADIUS secret furnished by the RADIUS server.
  • Page 81 User Manual of WAP-200N/WBS-200N The security mode includes the following settings: Object Description Select WPA2 from the drop-down list to configure the wireless network • Security Mode using WPA2 encryption method. Select Both, TKIP, or AES as the encryption type.

  • Page 82: Figure 5-45 Security Settings - Wpa Mixed (Wpa Mixed Enterprise)

    User Manual of WAP-200N/WBS-200N  WPA Mixed (WPA Mixed Enterprise) Figure 5-45 Security Settings – WPA Mixed (WPA Mixed Enterprise) The security mode includes the following settings: Object Description Select WPA Mixed from the drop-down list to configure the wireless •...
  • Page 83 User Manual of WAP-200N/WBS-200N • Interim Accounting Interval Specify the interim accounting interval (60 - 600 seconds). • Save Click Save to save the settings. Click Cancel to cancel the unsaved changes and revert to the previous • Cancel settings.

  • Page 84: Wireless Mac Filter

    User Manual of WAP-200N/WBS-200N 5.5.4 Wireless MAC Filter Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC addresses. You can manually add a MAC address to restrict the permission to access the device or refer to section 5.2.3...

  • Page 85: Wireless Advanced Settings

    User Manual of WAP-200N/WBS-200N 5.5.5 Wireless Advanced Settings Click “Wireless  Wireless Advanced Settings” to configure the wireless advanced settings. This section allows you to configure the wireless related settings to optimize the wireless network. Figure 5-47 Wireless Advanced Settings...

  • Page 86: Management

    User Manual of WAP-200N/WBS-200N regulation. When the length of a data packet exceeds this value, the device will send an RTS frame to the destination wireless node, and the latter will reply • RTS/CTS Threshold with a CTS frame, and thus they are ready to communicate. The default value is 2346.

  • Page 87: Management Vlan

    User Manual of WAP-200N/WBS-200N Figure 5-48 Administration (Password Settings) The page includes the following settings: Object Description • New Name Enter a new username for logging in to the Web page. • New Password Enter a new password for logging in to the Web page.

  • Page 88: Snmp Settings

    User Manual of WAP-200N/WBS-200N • Accept Click Accept to apply the changes. • Cancel Click Cancel to cancel the settings. 5.6.3 SNMP Settings SNMP is used in network management systems to monitor network-attached devices for conditions that warrant administrative attention.

  • Page 89: Backup/Restore Settings

    User Manual of WAP-200N/WBS-200N • Community Name Enter the password for accessing the SNMP community for read and (Read/Write) write access. • Trap Destination Address Enter the IP address where SNMP traps are to be sent. • Trap Destination Enter the password of the SNMP trap community.

  • Page 90: Auto Reboot Settings

    User Manual of WAP-200N/WBS-200N 5.6.5 Auto Reboot Settings Click “Management  Auto Reboot Settings” and the following page will be displayed. This page allows you to enable and configure system auto reboot interval. The device can regularly reboot according to the frequency in different time formats of interval.
  • Page 91 User Manual of WAP-200N/WBS-200N The page includes the following settings: Object Description • Current Firmware Version Click ON to enable or click OFF to disable the option. Click Choose File to locate and select the upgrade file from your local •...

  • Page 92: Time Settings

    User Manual of WAP-200N/WBS-200N Step 4. When the upgrade is finished, the system will auto reboot and you can click the hyperlink “Click here when AP is ready” after the system restarts. 5.6.7 Time Settings Click “Management  Time Settings” to configure time zone and NTP server settings to be in sync with the device’s time.

  • Page 93: Wi-Fi Schedule

    User Manual of WAP-200N/WBS-200N 5.6.8 Wi-Fi Schedule This page allows you to configure wireless schedule. The device can regularly enable/disable Wi-Fi function according to the pre-defined schedule rules. Click “Management  Auto Reboot Settings” and the following page will be displayed.

  • Page 94: Cli Settings

    User Manual of WAP-200N/WBS-200N 5.6.9 CLI Settings The command line interface (CLI) allows user to access the device through a command console, modem or Telnet connection for configuration. Click “Management  CLI Settings” to enable/disable CLI (Command Line Interface). Figure 5-56 CLI Settings...

  • Page 95: Diagnostics

    User Manual of WAP-200N/WBS-200N The page includes the following settings: Object Description • Syslog Enable or disable the syslog function. • Log Server IP Address Enter the IP address of the log server. • Local Log Enable or disable the local log service.

  • Page 96: Logout

    User Manual of WAP-200N/WBS-200N The page includes the following settings: Object Description • Target IP / Domain Name Enter the IP address you would like to search. • Ping Packet Size Enter the packet size of each ping. • Number of Pings Enter the number of times you want to ping.

  • Page 97: Appendix A: Troubleshooting

    Appendix A: Troubleshooting If you find the AP is working improperly or stop responding to you, please read this troubleshooting first before contacting the Planet Tech Support for help. Some problems can be solved by yourself within very short time. Scenario Solution a.
  • Page 98 User Manual of WAP-200N/WBS-200N c. Are you too far from your AP? Try to get closer. d. Please remember that you have to input ESSID on your wireless client manually, if ESSID broadcast is disabled. a. Are you using QoS function? Try to disable it and try again.

  • Page 99: Appendix B: Use Planet Smart Discovery To Find Ap

    User Manual of WAP-200N/WBS-200N Appendix B: Use Planet Smart Discovery to find AP To easily discover the WAP-200N/WBS-200N in your Ethernet environment, the Planet Smart Discovery Utility is an ideal solution. The utility is available at: http://www.planet.com.tw/en/product/images/48590/Planet_Utility.zip The following instructions will guide you to how to use the Planet Smart Discovery Utility.

  • Page 100: Appendix C: Faq

    User Manual of WAP-200N/WBS-200N Appendix C: FAQ Q1: How to set up the AP Client Connection Topology: 1. Use static IP in the PCs that are connected with AP-1 (Site-1) and AP-2 (Site-2). In this case, Site-1 is “192.168.1.100”, and Site-2 is “192.168.1.200”.
  • Page 101 User Manual of WAP-200N/WBS-200N 3. In the AP-1, go to “System-> Operation Mode” and set it to use “Access Point” mode. Then, click “Save & Apply”. In the AP-1, go to “Wireless-> Wireless Network” to configure channel and click “Edit” for security setting.
  • Page 102 User Manual of WAP-200N/WBS-200N In the SSID Profile, you can configure your own SSID and Passphrase. Then, click “Save” to go back to the main page. Click “Accept” to save the configurations. -101-...
  • Page 103 User Manual of WAP-200N/WBS-200N Go to the “Status-> Save/Reload” page to click “Save & Apply” to force the AP to reboot so that it can apply all configurations and take effect. In the AP-2, go to “System-> IP Settings” to configure the IP address to static and different from the CPE.
  • Page 104 User Manual of WAP-200N/WBS-200N In the AP-2, go to “System-> Operation Mode” and set it to use “Client Bridge” mode. Then, click “Save & Apply”. 10. In the AP-2, go to “Wireless-> Wireless Network”. Click “Site Survey” to discover the AP-1.
  • Page 105 User Manual of WAP-200N/WBS-200N 11. Click the AP-1 to let the AP-2 to connect it. Then, it will go back to the main page. 12. Click the check box of the preferred BSSID and configure the encryption to be the same as the AP-1. Then, click “Accept”...
  • Page 106 User Manual of WAP-200N/WBS-200N 13. Go to the “Status-> Save/Reload” page to click “Save & Apply” to force the AP to reboot so that it can apply all configurations and take effect. 14. In the AP-2, go to the “Status-> Connection Status” page to check whether the AP-2 is associated to the AP-1 successfully.
  • Page 107 User Manual of WAP-200N/WBS-200N 15. In the AP-1, go to the “Status-> Wireless Client List” page to check the client’s signal strength. 16. Use command line tool to ping each other to ensure the link is successfully established. For example, from Site-1, ping 192.168.1.200; and at Site-2, ping 192.168.1.100.
  • Page 108 1) The encryption method must be the same at both sites if configured. 2) Both sites should be Line-of-Sight. 3) Included in the package are two 5dBi antennas for the WAP-200N only for long distance over 1km. Please connect to the 2.4GHz antennas with higher gain.

  • Page 109: Q2: How To Set Up The Wds Connection

    User Manual of WAP-200N/WBS-200N Q2: How to set up the WDS Connection Topology: 1. Use static IP in the PCs that are connected with WBS-200N-1 (Site-1) and WBS-200N-2 (Site-2). In this case, Site-1 is “192.168.1.100”, and Site-2 is “192.168.1.200”. 2. In the AP-1, go to “System-> IP Settings” to configure the IP address to static and different from the CPE.
  • Page 110 User Manual of WAP-200N/WBS-200N 3. In the AP-1, go to “System-> Operation Mode” and set it to use “WDS Access Point” mode. Then, click “Save & Apply”. 4. In the AP-1, go to “Wireless-> Wireless Network” to configure channel and click “Edit” for security setting.
  • Page 111 User Manual of WAP-200N/WBS-200N 5. In the SSID Profile, you can configure your own SSID and Passphrase. Then, click “Save” to go back to the main page. 6. Click “Accept” to save the configurations. -110-...
  • Page 112 User Manual of WAP-200N/WBS-200N Go to the “Status-> Save/Reload” page to click “Save & Apply” to force the AP to reboot so that it can apply all configurations and take effect. 8. In the AP-2, go to “System-> IP Settings” to configure the IP address to static and different from the CPE.
  • Page 113 User Manual of WAP-200N/WBS-200N 9. In the AP-2, go to “System-> Operation Mode” and set it to use “WDS Station” mode. Then, click “Save & Apply”. 10. In the AP-2, go to “Wireless-> Wireless Network”. Click “Site Survey” to discover the AP-1.
  • Page 114 User Manual of WAP-200N/WBS-200N 11. Click the AP-1 to let the AP-2 connect it. Then, it will go back to the main page. 12. Click the check box of the preferred BSSID and configure the encryption to be the same as the AP-1. Then, click “Accept”...
  • Page 115 User Manual of WAP-200N/WBS-200N 13. Go to the “Status-> Save/Reload” page to click “Save & Apply” to force the AP to reboot so that it can apply all configurations and take effect. 14. In the AP-2, go to the “Status-> Connection Status” page to check whether the AP-2 is associated with the AP-1 successfully.
  • Page 116 User Manual of WAP-200N/WBS-200N 15. In the AP-1, go to the “Status-> Wireless Client List” page to check the client’s signal strength. 16. Use command line tool to ping each other to ensure the link is successfully established. For example, from Site-1, ping 192.168.1.200; and at Site-2, ping 192.168.1.100.
  • Page 117 1) The encryption method must be the same at both sites if configured. 2) Both sites should be Line-of-Sight. 3) Included in the package are two 5dBi antennas for the WAP-200N only for long distance over 1km. Please connect to the 2.4GHz antennas with higher gain.

  • Page 118: Ec Declaration Of Conformity

    AP/CPEΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ disposições da Directiva 1999/5/CE. ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ Por medio de la presente, PLANET Technology Výrobca PLANET Technology Corporation, týmto Español Slovensky Corporation, declara que 300Mbps 802.11n deklaruje, že táto 300Mbps 802.11n Wireless...

This manual is also suitable for:

Wbs-200n

Table of Contents