Igmp Port Policy - Planet WSD-800 User Manual

4.9.3 IGMP Port Policy

For the security and management issue, the Switch is allowed to limiti the number of multicast groups by a specific
port. With system default setting, all the learned Multicast groups are accepted and forwarded. Atter the IGMP Port
Policy be configured on a specific port, the Switch will restrict the number of IGMP groups according to the
parameter. As the below drawing shows:
The following fields can be set for IGMP Port Policy configuration:
Port: Indicates the port , which will be limited for the accepted IGMP groups
Group Number: Use to limit the number of IGMP groups that an interface can accept. The possible value
as following:
•
Disable - No limit on the number of IGMP groups. ( Defatul Value)
•
0-100 – 0: No IGMP grpups allowed; 1-100: The number of accepted IGMP groups on the
specific port.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-79-