Show Command - Planet WSD-800 User Manual

set security mac-learning
set security static-MAC
set snmp
set snmp community
set snmp rmon
set snmp trap
set spantree disable
set spantree enable
set spantree fwddelay
set spantree hello
set spantree maxage
set spantree priority
set system contact
set system default-gateway
set system ip
set system location
set system mac
set system management-vlan
set system name
set trunk
set vlan <vid> name
set vlan <vlan id> <portlist>
set vlan port-mode
set vlan type port-based
set vlan type dot1q-based

3.5.2.6 Show command

Show command is to display the current parameter of the Switch functions. The follow table lists the show
commands and the equivalent usages.
Command
show channel
show console-info
show dot1x local-userInfo
show dot1x state
show igmp-snooping group number
show igmp-snooping group policy
show igmp-snooping info
show igmp-snooping policy deny
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
Set port leanrning MAC (enable|disable)
Create static MAC entry
Enable/Disable snmp agent
Set snmp community string
Enable/Disable rmon state
Set snmp trap receive host
Disable spanning tree
Enable spaning tree
Set the forward delay for the spanning tree
Set the hello interval for the spanning tree
Set the max age interval for the spanning
Set the bridge priority for the spanning tree
Set system contact
Set default gateway
Set system ip mask
Set system location
Set system mac address
Specify a vlan for system management
Set system name
Set vlan trunk port
Set vlan name
Set vlan members
Set vlan port-mode
Set system be port-based vlan
Set system be dot1q-based vlan
Description
Show channel information
Show console-info
Show dot1x local user information
Show dot1x information
Show igmp-snooping group-limit
Show igmp-snooping group policy
Show igmp snooping information
Show igmp snooping policy deny
-24-