Mac Address Bind - Planet WSD-800 User Manual

4.7.2 MAC Address Bind

This function is based upon for the Switch security. When you add one MAC Address is bind with one port. It
remains in the Switch's address table, regardless of whether the device is physically connected to the Switch. This
saves the Switch from having to re-learn a device's MAC address after it has been disconnected or powered-off
from the network, and then reconnected at some time later. If the Network station is connected with one port want
to control the Switch, the station's MAC Address must be the same as one MAC Address
To bind the MAC Address, click on the Security/MAC Address Binding menu button, the main web page then
shows the MAC Address Bind function table.
1. Fill the MAC Address field with MAC address in the format "xx-xx-xx-xx-xx-xx " and choose the port to bind
the MAC Address in the Port field.
2. Click on the "Add" button.
3. To remove the MAC Address binded by the port. Simply click on the "Delete" button of the MAC Address in the
Show MAC Address Table.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-55-