Privileged Command - Planet WSD-800 User Manual

show qos map dot1p-cos-map
show qos map mac-cos-map
show qos map port-cos-map
show qos map vlan-cos-map
show qos queue egress-policy
show radius
show security MAC-aging
show security filter-MAC
show security mac-learning
show security static-MAC
show snmp
show snmp rmon
show spantree
show syntax
show system
show trunk
show version
show vlan
show vlan type

3.5.2 Privileged Command

To access to the second level, enter the "enable" command in the first level. The sysem then prompt for a
password. Please enter "admin" for the password.
The promt then changes to "Switch\enable>". Entering a question mark "?" at the prompt displays the list of
commands available for command mode.
3.5.2.1 Clear command
Clear command is to clear the parameter. The follow table lists the clear commands and the equivalent usages.
Command
clear channel
clear dot1x local-userInfo
clear igmp-snooping policy deny
clear mirror monitored-port egress
clear mirror monitored-port ingress
clear multicast router
clear port counters
clear port rate-shaping
clear port spantree portcost
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
Show qos map cos-queue-map
Show qos map mac-cos-map
Show each port's cos
Show qos map vlan-cos-map
Show qos queue egress-policy
Show radius information
Show MAC aging time
Show MAC filter entry
Show port security status
Show static mac table information
Show snmp information
Show snmp rmon state
Show spanning tree information
Show basic help infomation
Show system information
Show trunk information
Get last software version
Show vlan information
Show current vlan type
Description
Clear member from channel
Clear igmp-snooping group policy
Clear igmp snooping policy deny
Clear egress monitored port for mirror
Clear ingress monitored port for mirror
Clear router port
Clear port statistics counter
Clear rate-shaping of all ports
Restore spanning tree port cost to default value
-20-