Led Indications - Planet WSD-800 User Manual

Figure 2-3 shows the front panel of WGSD-1022C.

2.1.3 LED Indications

■
WSD-800
■
System
LED Color
PWR
Green
SYS
Green
■
Per 10/100Base-TX RJ-45 Port ( Port-1 to Port-8)
LED Color
LNK/ACT
Orange
FDX/COL
Green
100
Green
■
WGSD-910 / WGSD-1022C
■ System
LED Color
PWR
Green
SYS
Green
■ Per 10/100Base-TX RJ-45 Port ( Port-1 to Port-8)
LED Color
LNK/ACT
Green
SPEED
Orange
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
WGSD-1022C front panel.
Figure 2-3
Lights to indicate that the Switch is powered on.
Lights to indicate the system is working.
Blink to indicate that the Switch is actively sending or receiving data over that
port.
Lights to indicate respective port is in full duplex (FDX) mode. Otherwise, it is
OFF for half duplex (HDX) operations. It blinking amber when collisions are
occurring on the respective port.
Lights to indicate the port is acting in 100Mbps speed, off to indicate the port is
acting in 10Mbps.
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
Lights to indicate the link through that port is successfully established.
Blink: indicate that the Switch is actively sending or receiving data over that port.
Lights to indicate the port is running in 100Mbps speed.
Off: indicate that the port is operating at 10Mbps.
-11-
Function
Function
Function
Function