NEC SL2100 Programming Manual page 563

ISSUE 2.0
Item Item
No.
40 G.726 Jitter Buf-
fer - Minimum
41 G.726 Jitter Buf-
fer - Average
42 G.726 Jitter Buf-
fer - Maximum
49 RTP Filter
65 VAD Negotiation
on SDP
66 Voice Band Data
(VBD)
67 VBD Payload
Type
Conditions
None
Feature Cross Reference
None
Programming Manual
Input Data
0 ~ 300 ms (for VoIPDB Set the minimum value of the Jitter
mode) Buffer of G.726 is set. Jitter is the
10 ~ 300 ms* (for Built- variation in the time between pack-
In VoIP mode) ets arriving and the buffer allows this
variation to be absorbed.
Set the average G.726 Jitter Buffer.
Set the maximum G.726 Jitter Buf-
fer.
0 = Disable
1 = IP
2 = IP + SSRC
0 = Disable This PRG is used to determine the
1 = Enable VAD determination method setting
VAD information on SDP.
This PRG is effective when VAD is
enabled on each codec.
0 = Disable This PRG is used for setting VBD to
1 = Enable is "Enable/Disable".
This PRG is necessary to set the 1:
Special in PRG15-03-03 for target
terminal.
96 ~ 127 This PRG is specifies the Payload
Type number used by VBD.
Description
G.711 and G.729 are targets at
this time.
SL2100
Default Related
Program
30
60
120
1
0
0 15-03-03
97 15-03-03
2-539
Program
84