Dial Analysis Extension Table - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
IN
Description
When Program 44-02-02 is set to type 3, use Program 44-03 : Dial Analysis Extension Table to set
the dial extension analysis table. These tables are used when the analyzed digits must be more than
eight digits. If the received digits do not match the digits set in tables 1 ~ 250, table number 252 is
used to refer to the next Extension Table Area (1 ~ 4) to be searched. If the received digits are not
identified in tables 1 ~ 250, the F-Route selection table number defined in table 251 is used.
Input Data
Extension Table Area Number
Dial Analysis Table Number
Dial Analysis Table Number : 1 ~ 250
Item Item
No.
01 Dial
02 ARS/F-Route Select Table
Number
Dial Analysis Table Number : 251
Item Item
No.
03 ARS/F-Route Select Table
Number
Dial Analysis Table Number : 252
Item Item
No.
04 Next Table Area Number
Programming Manual
Program 44 : ARS/F-Route Setup

44-03 : Dial Analysis Extension Table

Input Data
Up to 36 digits
Digits = 1 ~ 9, 0, , #, @
*
(Press Line Key 1 for wild character @)
[Not used F-Route Time Schedule]
0 ~ 100 (F-Route Table No.) <PRG 44-05>
[Use F-Route Time Schedule]
0 ~ 100 (F-Route Selection No.) <PRG 44-04>
Input Data
Not used F-Route Time Schedule]
0 ~ 100 (F-Route Table No.) <PRG 44-05>
[Use F-Route Time Schedule]
0 ~ 100 (F-Route Selection No.) <PRG 44-04>
Input Data
0 ~ 4
SL2100
1 ~ 4
1 ~ 252
Default Related
Program
No Setting 44-02
0 44-01
44-04
44-05
Default Related
Program
0 44-01
44-03-01
44-04
44-05
Default Related
Program
0 44-03-01
2-427
Program
44